parts and accessories at Freeway Trailer Sales

ID 008-251-05

1 of 5

008-251-05 3500lb 6 on 5-1/2" Bolt Pattern Idler Hub

Dexter 8-251-5 idler hub fits 2990lb to 3500lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

4-1/4" overall height
1/2"-20 thread pitch lug studs
1 - L44610 outer bearing race (pre-installed)
1 - L68111 inner bearing race (pre-installed)
has a 1.98" bore diameter
Rated 1750 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$66.99

ID 008-256-05

1 of 5

008-256-05 3500lb 5 on 5-1/2" Bolt Pattern Idler Hub

Dexter 8-256-05 idler hub fits 2990lb to 3500lb capacity axles and has a 5 on 5-1/2" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 5 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

4-1/4" overall height
1/2"-20 thread pitch lug studs
1 - L44610 outer bearing race (pre-installed)
1 - L68111 inner bearing race (pre-installed)
has a 1.98" bore diameter
Rated 1750 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$66.99

ID 008-256-07

1 of 5

008-256-07 3500lb 5 on 5" Bolt Pattern Idler Hub

Dexter 8-256-07 idler hub fits 2990lb to 3500lb capacity axles and has a 5 on 5" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 5 on 5" lug bolt pattern (see image on how to measure lug spacing)

4-1/4" overall height
1/2"-20 thread pitch lug studs
1 - L44610 outer bearing race (pre-installed)
1 - L68111 inner bearing race (pre-installed)
has a 1.98" bore diameter
Rated 1750 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$66.99

ID K08-259-1G

1 of 7

K08-259-1G 2200lb 5 on 4-1/2" Bolt Pattern Small Flange Pre-Greased Idler Hub Kit with 1-1/16" Bearing Set

The Dexter Axle K08-259-1G pre greased small flange idler hub kit fits 1250lb to 2200lb capacity axles and has a 5 on 4-1/2" bolt pattern. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Compatible all with BTR(1-1/16" bearing combination) and comes with both lubeable style dust cap and standard solid dust cap that are both interchangeable with all E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands. This hub has a 5-1/2" diameter flange for use with 8", 10", and 12" trailer wheels.

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - 008-259-05 idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- 5-1/2" diameter small flange
- 4-1/8" overall height
- 1/2"-20 thread pitch lug studs
- Rated 1100 lbs. capacity per side
2 - 031-031-02 L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
2 - 031-031-01 L44610 outer bearing cup race (pre-installed)
1 - 010-009-00 Grease seal (See Note)
- 1.500" inner diameter
- 1.987" outer diameter
1 - 021-041-01 1.98" outer diameter lube style cap
1 - 085-001-00 rubber lube style cap plug
1 - 021-003-00 1.98" outer diameter standard dust cap
5 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 005-023-00 1" d shaped spindle washer
1 - 005-027-00 1" round spindle washer
1 - 006-176-00 1" slotted spindle nut
1 - 019-002-00 cotter pin
1 - 006-191-00 1" hex spindle nut
1 - 006-190-00 d shaped hex nut retainer
1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

For use with 8", 10" and 12" wheels only

Note: Some trailer applications use a 1.249" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#12192TB

Price$67.99

ID 008-247-05

1 of 4

008-247-05 3500lb 5 on 4-1/2" Bolt Pattern 10" Brake Drum

Dexter 8-247-5 10" hub and drum fits 3500lb capacity axles and has a 5 on 4-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$78.99

ID K08-248-1G

1 of 7

K08-248-1G 3500lb 5 on 4-1/2" Bolt Pattern Pre-Greased Idler Hub Kit with 1-1/16" and 1-3/8" Bearing Set

The Dexter Axle K08-248-1G pre greased idler hub kit fits 2990lb to 3500lb capacity axles and has a 5 on 4-1/2" bolt pattern. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combinations and comes with both lubeable style dust cap and standard solid dust cap that are both interchangeable with all E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

Complete pre-greased fully assembled boxed trailer idler hub kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - 008-248-05 idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- 6-1/4" diameter flange
- 4-1/8" overall height
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - 031-031-02 L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
1 - 031-033-02 L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
1 - 031-031-01 L44610 outer bearing cup race (pre-installed)
1 - 031-033-01 L68111 inner bearing cup race (pre-installed)
1 - 010-019-00 (171255TB) Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 021-041-01 1.98" outer diameter lube style cap
1 - 085-001-00 rubber lube style cap plug
1 - 021-003-00 1.98" outer diameter standard dust cap
5 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 005-023-00 1" d shaped spindle washer
1 - 005-027-00 1" round spindle washer
1 - 006-176-00 1" slotted spindle nut
1 - 019-002-00 cotter pin
1 - 006-191-00 1" hex spindle nut
1 - 006-190-00 d shaped hex nut retainer
1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$82.99

ID 008-201-09

1 of 4

008-201-09 6000lb 6 on 5-1/2" Bolt Pattern 12" Brake Drum

Dexter 8-201-9 12" hub and drum fits 5000lb and 6000lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 3000 lbs. capacity per side
1 - 15245 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 15123 outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which has a 1.250" inner diameter. This drum uses a 15123 outer bearing which is the same bearing inner diameter and will fit the 5000lb and 5200lb axles. The only difference is the outer bore of the drum. If you have LM67048 outer bearings then we recommend buying the 15123 bearing that fits this.

Price$112.99

ID 008-247-12

1 of 4

008-247-12 3500lb 5 on 4-3/4" Bolt Pattern 10" Brake Drum

Dexter 8-247-12 10" hub and drum fits 3500lb capacity axles and has a 5 on 4-3/4" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 5 on 4-3/4" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$114.99

ID 008-249-05

1 of 4

008-249-05 3500lb 5 on 5-1/2" Bolt Pattern 10" Brake Drum

Dexter 8-249-5 10" hub and drum fits 3500lb capacity axles and has a 5 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 5 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$114.99

ID 008-249-07

1 of 4

008-249-07 3500lb 5 on 5" Bolt Pattern 10" Brake Drum

Dexter 8-249-7 10" hub and drum fits 3500lb capacity axles and has a 5 on 5" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 5 on 5" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$114.99

ID K08-247-1G

1 of 6

K08-247-1G 3500lb 5 on 4-1/2" Bolt Pattern 10" Pre-Greased Brake Drum Kit

The Dexter K08-247-1G pre greased 10" hub and drum kit has a 5 on 4-1/2" bolt pattern and fits 3500lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 10" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

1 - 008-247-05 Integrated hub-and-drum with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 10" x 2-1/4" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - 031-031-02 L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
1 - 031-033-02 L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
1 - 031-031-01 L44610 outer bearing cup race (pre-installed)
1 - 031-033-01 L68111 inner bearing cup race (pre-installed)
1 - 010-019-00 171255TB Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 021-041-01 1.98" outer diameter lube style cap and rubber plug
1 - 085-001-00 rubber lube style cap plug
1 - 021-003-00 1.98" outer diameter standard dust cap
5 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
1 - 005-023-00 1" d shaped spindle washer
1 - 005-027-00 1" round spindle washer
1 - 006-176-00 1" slotted spindle nut
1 - 019-002-00 cotter pin
1 - 006-191-00 1" hex spindle nut
1 - 006-190-00 d shaped hex nut retainer
1 - 059-831-00 instruction sheet

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

Price$115.99

ID 008-201-05

1 of 4

008-201-05 5200lb 6 on 5-1/2" Bolt Pattern 12" Brake Drum

Dexter 8-201-5 12" hub and drum fits 5000lb and 5200lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 2600 lbs. capacity per side
1 - LM67010 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with LM67048 outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048. Please verify you have this outer bearing number before ordering.

Price$116.99

ID 008-250-05

1 of 4

008-250-05 3500lb 6 on 5-1/2" Bolt Pattern 10" Brake Drum

Dexter 8-250-5 10" hub and drum fits 3500lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 10" x 2-1/4" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 1750 lbs. capacity per side
1 - L44610 outer bearing cup race (pre-installed)
1 - L68111 inner bearing cup race (pre-installed)
Works with L68149 outer bearing cone and L68149 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$118.99