9/16"-18 Zinc finish lug stud. Thread depth is 1-1/4". Spline knurl is 0.69". Overall length is 2-9/16".

011-018-00 U-Bolt for 5.2K-7K axles with 3″ tube  fits all industry standard axles.

• 1/2" diameter
• 3-1/8" inside width
• 6-9/16" inside crown to end of thread Length

Dexter axle tie plate used for mounting 3500 lb axles

Front Spring Hanger for use with 1 3/4" wide springs. from outside top to center hole is 3 1/4". Uses standard 9/16" suspension bolt.

Center Spring Hanger for use with 1 3/4" wide eye to eye style leaf spring equalizers. From outside top to center hole is 4 3/4". Uses standard 9/16" suspension bolt and is 1/4" thick.

Dexter axle tie plate used for mounting 5200/6000 lb. capacity axles

This is a screw in grease cap with an OD of 2 7/8" - 12 thread. This grease cap is for 8 lug 6 to 8k axles and Dexter 9k (prior to 10/89)

OD - 2 7/8" - 12 Thread

Parts needed with this grease cap

• O-Ring - 010-045-00
• Rubber Plug - 046-032-00

Center Bolt for Slipper suspension hanger 7/8" x 4 1/2"

Equalizer short rise A-frame style. Please refer to image 2 for measurement locations.

Equilizer long rise A-frame style. Please refer to image 2 for measurement locations.

Equalizer 4" High Rise A-frame style. Please refer to image 2 for measurement locations.

Dexter 8-091-5 idler hub fits 1250lb to 2200lb capacity axles and has a 4 on 4" bolt pattern. Compatible all with BT(1" bearing combination) or BTR(1-1/16" bearing combination) style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands. This hub has a 5-1/2" diameter flange for use with 8", 10", and 12" trailer wheels.

• 1 - Small face Idler hub with 4 on 4" lug bolt pattern (see image on how to measure lug spacing)
  • 5-1/2" diameter flange
  • 4-1/8" overall height
  • 1/2"-20 thread pitch lug studs
  • has a 1.98" bore diameter
  • Rated 1100 lbs. capacity per side(bearing size dependent)
• 2 - L44610 bearing races (pre-installed)

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

For use with 8", 10" or 12" wheels

Please note: This hub is not to be used on 13" or larger wheels.

Dexter 8-259-5 Small flange idler hub fits 1250lb to 2200lb capacity axles and has a 5 on 4-1/2" bolt pattern. Compatible all with BT(1" bearing combination) or BTR(1-1/16" bearing combination) style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands. This hub has a 5-1/2" diameter small flange for use with 8", 10", and 12" trailer wheels.

• 1 - Small face Idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • 5-1/2" diameter small flange
  • 4-1/8" overall height
  • 1/2"-20 thread pitch lug studs
  • has a 1.98" bore diameter
  • Rated 1100 lbs. capacity per side(bearing size dependent)
• 2 - L44610 bearing races (pre-installed)

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

For use with 8", 10" or 12" wheels

Please note: This hub is not to be used on 13" or larger wheels.

Dexter 8-258-5 Large flange idler hub fits 1250lb to 2200lb capacity axles and has a 5 on 4-1/2" bolt pattern. Compatible all with BT(1" bearing combination) or BTR(1-1/16" bearing combination) style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands. This hub has a 6-1/4" diameter large flange for use with 13", 14", and 15" trailer wheels.

• 1 - Large face Idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • 6-1/4" diameter large flange
  • 4-1/8" overall height
  • 1/2"-20 thread pitch lug studs
  • has a 1.98" bore diameter
  • Rated 1100 lbs. capacity per side(bearing size dependent)
• 2 - L44610 bearing races (pre-installed)

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

For use with 13", 14" or 15" wheels

Please note: will not work on 8" wheels.

Dexter 8-213-9 idler hub fits 5200lb to 6000lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible all with 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

• 4-1/2" overall height
• 1/2"-20 thread pitch lug studs
• 1 - 15245 outer bearing race (pre-installed)
• 1 - 25520 inner bearing race (pre-installed)
• has a 2.44" bore diameter
• Rated 3000 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Dexter 8-248-10 idler hub fits 2990lb to 3500lb capacity axles and has a 5 on 4-3/4" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

1 - Idler hub with 5 on 4-3/4" lug bolt pattern (see image on how to measure lug spacing)

• 4-1/4" overall height
• 1/2"-20 thread pitch lug studs
• 1 - L44610 outer bearing race (pre-installed)
• 1 - L68111 inner bearing race (pre-installed)
• has a 1.98" bore diameter
• Rated 1750 lbs. capacity per side

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.