7/8" Self Locking Nut used on center rocker bolt on 7/8" slipper suspension bolt.

3.5" x 9/16-18 Suspension Bolt

Dexter U-bolt for 3500-LB capacity axles with 2-3/8" diameter round tube axles. U-bolt diameter is 1/2" x 2-3/8" inner Width x 5-1/2"" inside crown to end of thread Length

Dexter axle tie plate used for mounting 2000 lb Axles

Replacement oil fill plug for the threaded screw-on oil bath cap for 6 and 8 lug oil bath drums. Note: Dexter does not use this on all applications.

Dexter Axle E-Z Lube Spindle Nut Castle Style - 1" inner diameter

This is a push in grease cap with an OD of 2.45" and is 1.34" high. This grease cap is for 12 x 2" hubs with a 4, 5, or 6 lug bolt pattern.

OD - 2.45"

This is a push in grease cap with an OD of 1.98" and is 1.20" high. This grease cap is for 10 x 2.25" hubs with a 4, or 5 lug bolt pattern

OD - 1.98"

This is a push in grease cap with an OD of 2.72" and is 1.39" high. This grease cap is for 12 x 2" hubs with an 8 lug bolt pattern.

OD - 2.72"

This is a galvanized lube style grease cap with an outer diameter of 1.98" and a height of 1.40". This cap fits all industry standard 1,000lb 2,000lb, and 3,500lb capacity axle hubs and brake drum applications.

Requires rubber inspection plug 085-001-00 (sold separately)

This axle dust cap works on all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

This is a galvanized lube style grease cap with an outer diameter of 2.44" and a height of 1.525". This cap fits all industry standard 5,200lb and 6,000lb capacity axle hubs and brake drum applications.

Requires rubber inspection plug 085-001-00 (sold separately)

This axle dust cap works on all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

This is a galvanized lube style grease cap with an outer diameter of 2.72" and a height of 1.525". This cap fits all industry standard 5,200lb and 6,000lb, and 7,000lb capacity axle hubs and brake drum as long as they are 8 lug applications.

Requires rubber inspection plug 085-001-00 (sold separately)

This axle dust cap works on all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Dexter Axle E-Z Lube Spindle Nut Retainer

Dexter Axle E-Z Lube Spindle Nut