5/16" Nut used on the rear end of a slipper spring.

Dexter Axle E-Z Lube Tang Washer 1" inner diameter with D-shaped flat spot

This D-shaped washer fits 13/16" threaded trailer spindles with a flat spot. 1-5/8" Outside diameter, 13/16" Inside diameter. 3/32" Thick. Commonly used on 2,500-3,500 lb. axles. Used on Trailer Buddy-UFP Axles, EZ Loader Axles.

Same as EZ Loader # 290-034115 and Old UFP #32402

• 13/16" I.D. (0.768") trailer axle spindle nut
• Fine thread
• Thread size 13/16" x 20 (thread count)
• Used with "D" style spindles with a cotter pinhole.
• Common on Trailer Buddy-UFP, Loadrite, and EZ-Loader trailer axles.
• Use with axle nut retainer to complete the installation.

Same as EZ Loader Part# 290-010492 and Old UFP# SN813 and 32414.

This spindle nut retainer (Named Cookie-Cutter for shape) is used to retain the Spindle Nut once the pre-load is set. Cookie cutter style axle nut retainer. Common on EZ-Loader Boat Trailers, Trailer Buddy Axles, and Loadrite trailers.

Fits over 13/16" spindle nut.

Same as EZ Loader # 290-001405

Same as Old UFP # 32418 and LS813

5/16" suspension bolt used on rear end of spring on slipper suspension systems

Replacement O Ring that's 2.609" for oil bath caps. Fits 021-035-00 Dexter threaded oil bath caps.

Rubber EZ Lube cap plug, fits 1.18" center hole grease caps. use with the EZ Lube systems.

Fits the following grease caps

• 021-041-01 - 5 Lug grease cap
• 021-042-01 - 6 Lug grease cap
• 021-043-01 - 8 Lug grease cap

Dexter Axle 5-23 E-Z Lube D Shaped Spindle Washer. 1-3/4" outside diameter and 1" inner diameter with D-shape flat spot

Dexter Axle E-Z Lube 1" Plain Spindle Washer. 1-3/4" outside diameter and 1" inner diameter

1/2"-20 Zinc finish lug bolt. Thread depth is 7/8". 60 degree tapered seat. Overall length is 1-10/16". Socket size is 13/16".

Dexter axle U-bolt for 2000-LB capacity axles with 1-3/4" diameter round tube axles. U-bolt diameter is 3/8" x 1-3/4" inner Width x 4-1/4"" inside crown to end of thread Length

This D-shaped washer fits 13/16" threaded trailer spindles with a flat spot. 1-3/4" Outside diameter, 13/16" Inside diameter. 3/16" Thick. Commonly used on 4,200. axles. Used on Trailer Buddy-UFP Axles.

Same as Old UFP #34456

9/16"-18 Zinc plated lug nut. 60 Degree conical seat. Overall length is 3/4". Socket size is 7/8"

Commonly used in 8 lug applications with 9/16" lug studs

1/2"-20 lug stud. Thread depth is 1-1/4". Overall length is 2-3/16". Knurl size is 0.59".

Commonly used on Dexter Axle 4 and 5 lug applications.

1/2"-20 lug stud. Thread depth is 1-1/4". Overall length is 2-7/8". Knurl size is 0.54".

Commonly used on Dexter Axle 6 and 8 lug applications.

Dexter replacement rubber plug for most 6K and up Dexter oil bath plastic caps.

Fits the following oil bath caps

• 021-035-00
• 021-036-00
• 021-040-00

This D-shaped washer fits 1" threaded trailer spindles with a flat spot. 2" Outside diameter, 1" Inside diameter. 3/32" Thick. Commonly used on 5,200-7,000 lb. axles. Commonly used UFP and other marine trailer axles.