Complete Dexter Axle 4" drop 7000lb triple axle slipper spring suspension kit with brakes. This axle package has everything you need to add or replace your complete axle assembly on your trailer, except for tires and rims.
What's included?
- 3 - 7000lb Dexter Axle 4" drop trailer axle beam with E-Z Lube spindles. Comes with spindle nuts, nut retainer, and washers. - See Notes
- 6 - 3-01 Dexter Axle Leaf spring mounting seat for axle beam - See Notes
- 1 - SHK-3 Dexter Axle triple axle slipper hanger kit - Includes the following items:
- 2 - 28-01 Front hangers
- 4 - 29-01 Center hangers
- 2 - 30-28 Rear hangers
- 4 - 13-004 Slipper equalizers
- 6 - 7-17 Suspension bolts - 9/16"-18 x 3-1/2"
- 6 - 6-7 Self locking suspension nuts - 9/16"-18
- 4 - 7-1 Equalizer center bolt 7/8"-9 x 4-5/8"
- 4 - 6-111 Self locking equalizer nut 7/8"-9
- 6 - 7-7 Slipper spring suspension end bolt 5/16-18 x 3-1/4"
- 6 - 6-011 Slipper spring suspension end nyloc nut 5/16"-18
- 6 - 916HD865DRUM brake drum with 8 on 6-1/2" bolt circle with 9/16" studs
- 3 - 12BRKLH 12" x 2" Left electric brake assembly - manual adjust
- 3 - 12BRKRH 12" x 2" Right electric brake assembly - manual adjust
- 6 - 72-32 25-1/4" 5-leaf slipper springs with 3500lb capacity each
- 6 - 7000HG-EZ Dexter Axle bearing kit - Includes the following items:
- 6 - 14125A Outer Bearings
- 6 - 25580 Inner Bearings
- 6 - SL225-1 Grease seals
- 6 - 21-43-1 E-Z Lube grease caps
- 6 - 85-1 E-Z lube grease cap inspection plugs
- 48 - 6-53 Open acorn taper lug nuts - 9/16"-18 60-Degree
- 3 - UBK-300-916 Dexter Axle U-bolt kit - Includes the following items:
- 12 - U-bolts 9/16"-18 x 7" inside leg length
- 6 - Axle U-bolt tie plates
- 24 - U-bolt flange nuts9/16"-18
- 30 - 5-4 Lock washers 3/8"
- 30 - 6-10 Hex nut 3/8"
Notes:
- Axle beams come in various lengths - See image on how to measure your axle beam
- 4" drop measurement is from top of round tube to center of spindle
- Spring seats ship loose which makes axle beam more universal
- This axle kit is not pre-assembled.
7000LB Capacity 4" drop trailer axle beam with E-Z Lube spindles. Axle beam is round tube and tube diameter is 3". Our 7000LB capacity axle beams come standard with 5-hole studded brake mounting flange that is compatible with all standard 12" trailer brakes.
Axle takes standard 1-1/4"ID outer bearings 1-3/4"ID inner bearings and 2.250"ID grease seals
Axle is designed to be used with sprung type suspensions. Comes with leaf spring seats loose that can be welded in place depending on location and beam tolerances. spring seats can be installed either under-slung meaning spring seats used on underside of tube, or over-slung meaning spring seats used on top of tube body.
Having the spring seats come not pre-installed make our axle beams more universal than having to find one with the seats welded in the correct position.
Axle has a camber arch in the center, the upward bend in the axle is called "camber." Camber is the angular relationship of the wheel to the road surface in the vertical plane. Axles are built with a pre-determined bend in the tube that compensates for the expected deflection under load.
Over 20 different length options - Call us with the measurements in our photo so we can determine if one will fit your trailer. Refer to image for measurement locations.
(Also available as a straight axle kit)
Please verify your axle measurements and tolerances before ordering
Pro-tip:The E-Z Lube feature is designed to allow immersion in water and is not actually designed to grease your trailer bearings.
