Filter Results
Sort Order
Axle Specifications
Tire Specifications
Manufacturer

Shop for replacement Dexter Axle trailer axles and repair parts for all industry standard brands including Dexter Axle, LCI Lippert Components, and Rockwell American covering everything from axle beams and complete axle packages, manual and self adjusting electric trailer brake options from 2000LB capacity thru 7000LB capacity per beam, and marine hydraulic surge disk and drum brakes for boat trailers, U-bolt mounting hardware, hubs and drums, bearings, grease seals and axle dust covers from standard to bearing buddy protectors.

Home
» All Products
« Previous12345678910... »
ID 006-011-00
006-011-00 5/16" Suspension Nut

5/16" Nut used on the rear end of a slipper spring.

Price$0.99
ID 006-080-00
6-80 1/2"-20 Zinc Plated Lug Nut

1/2"-20 thread pitch Zinc plated lug nut. 60 Degree conical seat. Overall length is 10/16". Socket size is 13/16"

Price$0.99
ID 005-101-00
005-101-00 1"ID - D-Shaped Tang Washer

Dexter Axle E-Z Lube Tang Washer 1" inner diameter with D-shaped flat spot

Price$1.99
ID 005-164-00
005-164-00 13/16"ID - D-Shaped Spindle Washer 3/32" Thick

This D-shaped washer fits 13/16" threaded trailer spindles with a flat spot. 1-5/8" Outside diameter, 13/16" Inside diameter. 3/32" Thick. Commonly used on 2,500-3,500 lb. axles. Used on Trailer Buddy-UFP Axles, EZ Loader Axles.

Same as EZ Loader # 290-034115 and Old UFP #32402

Price$1.99
ID 006-007-00
006-007-00 9/16" Shackle Nut

9/16-18 self locking shackle nut

Price$1.99
ID 006-210-00
006-210-00 13/16"ID Spindle nut
  • 13/16" I.D. (0.768") trailer axle spindle nut
  • Fine thread
  • Thread size 13/16" x 20 (thread count)
  • Used with "D" style spindles with a cotter pinhole.
  • Common on Trailer Buddy-UFP, Loadrite, and EZ-Loader trailer axles.
  • Use with axle nut retainer to complete the installation.

Same as EZ Loader Part# 290-010492 and Old UFP# SN813 and 32414.

Price$1.99
ID 006-211-00
006-211-00 Spindle Nut Retainer

This spindle nut retainer (Named Cookie-Cutter for shape) is used to retain the Spindle Nut once the pre-load is set. Cookie cutter style axle nut retainer. Common on EZ-Loader Boat Trailers, Trailer Buddy Axles, and Loadrite trailers.

Fits over 13/16" spindle nut.

Same as EZ Loader # 290-001405

Same as Old UFP # 32418 and LS813

Price$1.99
ID 007-007-00
007-007-00 5/16" Suspension Bolt

5/16" suspension bolt used on rear end of spring on slipper suspension systems

Price$1.99
ID 010-045-00
010-045-00 Oil Bath O-ring

Replacement O Ring that's 2.609" for oil bath caps. Fits 021-035-00 Dexter threaded oil bath caps.

Price$1.99
ID 085-001-00
085-001-00 EZ Lube Cap Plug

Rubber EZ Lube cap plug, fits 1.18" center hole grease caps. use with the EZ Lube systems.

Fits the following grease caps

  • 021-041-01 - 5 Lug grease cap
  • 021-042-01 - 6 Lug grease cap
  • 021-043-01 - 8 Lug grease cap
Price$1.99
ID W1012H
W1012H 1/2"-20 Acorn Heat Treated Lug Nut
1/2"-20 thread pitch Chrome acorn heat treated lug nut. 60 Degree conical seat. Overall length is 1-6/16". Socket size is 3/4"
Price$1.99
ID 005-023-00
005-023-00 1"ID Spindle Washer D Shaped

Dexter Axle 5-23 E-Z Lube D Shaped Spindle Washer. 1-3/4" outside diameter and 1" inner diameter with D-shape flat spot

Price$2.99
ID 005-027-00
005-027-00 1"ID Round Spindle Washer

Dexter Axle E-Z Lube 1" Plain Spindle Washer. 1-3/4" outside diameter and 1" inner diameter

Price$2.99
ID 007-316-00
007-316-00 1/2in-20 Lug Bolt

1/2"-20 Zinc finish lug bolt. Thread depth is 7/8". 60 degree tapered seat. Overall length is 1-10/16". Socket size is 13/16".

Price$2.99
ID 011-054-00
011-054-00 Axle U-bolt for 2000-LB Axles

Dexter axle U-bolt for 2000-LB capacity axles with 1-3/4" diameter round tube axles. U-bolt diameter is 3/8" x 1-3/4" inner Width x 4-1/4"" inside crown to end of thread Length

Price$2.99
ID 014-001-01
014-001-01 9/16"ID x 1-3/4"L Spring Bushing
9/16"ID  x 1-3/4"L bushing used in standard double eye leaf springs.
Price$2.99
ID 005-171-00
005-171-00 13/16"ID - D-Shaped Spindle Washer 3/16" Thick

This D-shaped washer fits 13/16" threaded trailer spindles with a flat spot. 1-3/4" Outside diameter, 13/16" Inside diameter. 3/16" Thick. Commonly used on 4,200. axles. Used on Trailer Buddy-UFP Axles.

Same as Old UFP #34456

Price$3.99
ID 006-053-00
006-053-00 9/16in-18 Lug Nut

9/16"-18 Zinc plated lug nut. 60 Degree conical seat. Overall length is 3/4". Socket size is 7/8"

Commonly used in 8 lug applications with 9/16" lug studs

Price$3.99
ID 007-122-00
007-122-00 1/2in-20 Press-In Wheel Lug Stud

1/2"-20 lug stud. Thread depth is 1-1/4". Overall length is 2-3/16". Knurl size is 0.59".

Commonly used on Dexter Axle 4 and 5 lug applications.

Price$3.99
ID 007-262-00
007-262-00 1/2in-20 Press-In Wheel Lug Stud

1/2"-20 lug stud. Thread depth is 1-1/4". Overall length is 2-7/8". Knurl size is 0.54".

Commonly used on Dexter Axle 6 and 8 lug applications.

Price$3.99
« Previous12345678910... »