Trailer Jacks and Accessories at Freeway Trailer Sales

ID TJA-2000-B

1 of 6

TJA-2000-B 3000 lb Capacity Top-wind A-Frame Tongue Jack

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 14-1/4"

Dimensions see image

(A) Retracted = 8"
(B) Extended = 22-1/4"
(C) Clearance = 12-3/4"

Price$37.99

ID TJA-2001-B

1 of 6

TJA-2001-B 3000 lb Capacity Top-wind A-Frame Tongue Jack

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories. Low mounting base for better ground clearance.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 14-1/2"

Dimensions see image

(A) Retracted = 4-1/2"
(B) Extended = 19"
(C) Clearance = 14-1/2"

Price$37.99

ID TJA-2001S-B

1 of 6

TJA-2001S-B 3000 lb Capacity Side-wind A-Frame Tongue Jack

RAM Sidewind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 15"

Dimensions see image

(A) Retracted = 9"
(B) Extended = 24-1/8"
(C) Clearance = 14-3/4"

Price$46.99

ID 88-00-4500

1 of 4

88-00-4500 4" Tall Flip Jack Foot

The Fastway® FLIP™ 88-00-4500 jack foot extends your trailer jack by 4 inches, and saves you 48 cranks both up and down. The FLIP has two times more contact surface area than other jack feet, providing more stability for your trailer.

The Flip installs in seconds with no tools needed for most applications, and fits nearly every 2-1/4" tongue jack with a standard 2" lower pipe.

The Flip eliminates the need to search for rocks or wood blocks to put under your trailer jack. It is the only jack foot that is completely automatic as the Flip extends down and locks into place when jack is extended, then tucks up under the trailer frame when towing. It easily removes for low clearance situations, and fits virtually every bumper-pull trailer: horse, travel, cargo, RV, ATV, and flat bed.

Price$49.99

ID 88-00-6500

1 of 4

88-00-6500 6" Tall Flip Jack Foot

The Fastway® FLIP™ 88-00-6500 jack foot extends your trailer jack by 6 inches, and saves you 48 cranks both up and down. The FLIP has two times more contact surface area than other jack feet, providing more stability for your trailer.

The Flip installs in seconds with no tools needed for most applications, and fits nearly every 2-1/4" tongue jack with a standard 2" lower pipe.

The Flip eliminates the need to search for rocks or wood blocks to put under your trailer jack. It is the only jack foot that is completely automatic as the Flip extends down and locks into place when jack is extended, then tucks up under the trailer frame when towing. It easily removes for low clearance situations, and fits virtually every bumper-pull trailer: horse, travel, cargo, RV, ATV, and flat bed.

Price$49.99

ID TJP-2001-B

1 of 8

TJP-2001-B 3000 lb Weld-on Topwind Pipe Mount Swivel Jack

RAM Topwind pipe mount swivel trailer tongue jack comes with the mating pipe bracket for weld-on applications to side of trailer frame. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility trailers. Features a universal weld on pipe mounting base so if you are just replacing your tongue jack, you would not need to weld on the new bracket. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits.

3,000lb Support Capacity / 2,000lb Lift Capacity
Comfortable claw knob handle to operate the jack
Durable exterior grade black finish on outer tube
Clear zinc finish on inner tube and foot
9/16″ pin and lanyard assembly affixed to the jack to activate the swivel mechanism
Includes a 2″ raw round weld on mating pipe
Grease zerk for easy greasing of jack
Deep seated snap ring for side load support and raw weld on bracket
3-3/4″ x 7-1/2″ welded on durable zinc bottom foot for better stability
Leg extends 10"

Dimensions see image

(A) Retracted = 11-1/4"
(B) Extended = 21-1/4"
(C) Clearance = 5-1/2"

Price$49.99

ID TJA-5000T-B

1 of 6

TJA-5000T-B 5000 lb Capacity Top-wind A-Frame Tongue Jack

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 3,000lb capacity lift and 5,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

5,000lb Support Capacity / 3,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Comfortable claw knob handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 15"

Dimensions see image

(A) Retracted = 10"
(B) Extended = 25"
(C) Clearance = 12-1/2"

Price$54.99

ID TJB-2001-B

1 of 7

TJB-2001-B 3000 lb Weld-on Topwind Snap Ring Swivel Jack

RAM Topwind snap-ring swivel trailer tongue jack comes with a mounting bracket for weld-on applications to side of trailer frame. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility trailers. Features a universal snap ring so if you are just replacing your tongue jack, you would not need to weld on the new bracket. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits.

3,000lb Support Capacity / 2,000lb Lift Capacity
Comfortable claw knob handle to operate the jack
Durable exterior grade black finish on outer tube
Clear zinc finish on inner tube and foot
Large 1/2″ pull pin to activate the swivel mechanism
Grease zerk for easy greasing of jack
Deep seated snap ring for side load support and raw weld on bracket
4″ x 7″ welded on durable zinc bottom foot for better stability
Leg extends 10"

Dimensions see image

(A) Retracted = 11"
(B) Extended = 21"
(C) Clearance = 5-3/4"

Price$54.99

ID MJ-1200B

1 of 8

MJ-1200B 1200 lb Sidewind Bolt-on Marine Swivel Jack with 6-inch Wheel

RAM Sidewind bolt-on swing up swivel marine trailer jack. Easily bolts around trailer frames that are 2", 3" 4" or 5" tall. Rated for 1,200lb supporting and lift capacity weight limits. Includes swivel wheel for easy maneuvering. Ideal for use with boat, sport craft, snowmobile and other recreational trailers.

Bolt-on swivel jack is typically used on marine trailers. Jack has a zinc coating to help resist corrosion. Jack has spring loaded pin to make the swivel process quick and easy. When trailer is connected to tow vehicle jack can be quickly swiveled up and out of the way for traveling. Then when the trailer needs to be disconnected the jack can just as easily swiveled down to lift trailer.

1,200lb Support/Lift Capacity
Large 1/2″ pull pin to activate the swivel mechanism
Large grooved comfort handle to operate the jack
Four bolt pin through bracket design with large diamond shaped washer for side load support
Durable clear zinc finish for added corrosion resistance
Bolt on hardware included to mount to 2", 3" 4" or 5" tall trailer frames
Single 6″ poly caster wheel
Leg extends 10"

Dimensions see image

(A) Retracted = 12-1/2"
(B) Extended = 23-1/2"
(C) Clearance = 10-1/2"

Price$59.99

ID TJP-2001S-B

1 of 8

TJP-2001S-B 3000 lb Weld-on Sidewind Pipe Mount Swivel Jack

RAM Sidewind pipe mount swivel trailer tongue jack comes with the mating pipe bracket for weld-on applications to side of trailer frame. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility trailers. Features a universal weld on pipe mounting base so if you are just replacing your tongue jack, you would not need to weld on the new bracket. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits.

3,000lb Support Capacity / 2,000lb Lift Capacity
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer tube
Clear zinc finish on inner tube and foot
9/16″ pin and lanyard assembly affixed to the jack to activate the swivel mechanism
Includes a 2″ raw round weld on mating pipe
Grease zerk for easy greasing of jack
Deep seated snap ring for side load support and raw weld on bracket
3-3/4″ x 7-1/2″ welded on durable zinc bottom foot for better stability
Leg extends 11-1/4"

Dimensions see image

(A) Retracted = 10-3/4"
(B) Extended = 21-1/4"
(C) Clearance = 6-1/4"

Price$59.99