Filter Results
Sort Order
Manufacturer

Need a new or replacement dump trailer mesh tarp kit? We have them. We carry a large selection of replacement KTI Hydraulics dump system components.

Home
» All Products
« Previous12 »
ID 25-3
25-3 KTI Dump Reservoir Breather Cap with Dipstick
1 of 2

KTI plastic dump motor reservoir breather filler cap with metal dipstick


  • Features built-in vent to release pressure build up in the tank.
  • Made with rubber O-ring for tight seal.
  • Used on KTI plastic and steel reservoir tanks.
Price$9.99
ID 74-03
74-03 KTI Hydraulic Pump Harness for Solenoid and Coils
1 of 4
KTI pigtail to round male. This KTI Pigtail consist of 4 wires already equipped with crimped ends to connect right to the pump's solenoid and magnetic coils.
  • Made of four 14 gauge wires in a molten rubber cord.
  • Comes with one round molded male water tight end
  • Features a simple "screw in and go" design for connecting your KTI extension cord and cord/remote to the hydraulic pump
  • Designed to fit on any 2015 and newer KTI power up/power down hydraulic pumps
Note: electrical components are non returnable
Price$24.99
ID 3008176A
3008176A 7" Replacement Roll Tarp Crank Handle
1 of 3
7" Tarp replacement crank handle for the Buyers Products DTR-Series tarp kits and other tarp systems that use which uses a 1" diameter shaft.
Price$27.99
ID LC-08-S-5B
LC-08-S-5B Square KTI Hydraulic Pump Magnetic Coil for Down Valve with Spade Connections
1 of 3
KTI Hydraulics Electric Magnet Coil 10 volt DC
  • Used to open the hydraulic down-valve on both KTI power up/down and gravity down hydraulic pumps.
  • Slides over the valve and has two electrical spade prongs.
Note: electrical components are non returnable
Price$39.99
ID LC2-08-C-5B
LC2-08-C-5B Round KTI Hydraulic Pump Magnetic Coil for Up Valve with Spade Connections
1 of 3
KTI Hydraulics electric magnet coil 10 volt DC
  • Used to open the hydraulic up-valve on both KTI power up/down and gravity-down pumps.
  • Slides over the valve and has two electrical spade prongs.
Note: electrical components are non returnable
Price$39.99
ID 7000-S
7000-S 3-Post Hydraulic Pump Solenoid
Hydraulic dump system solenoid for 3 wire pump systems.
  • 12 volt DC 80 AMP
  • Universal replacement solenoid for power up/gravity down hydraulic pumps.
  • Used on a vide range of dumps, tilts, and hydraulic dovetail trailers.
  • Construction is Cadmium plated bracket.

Note: electrical items are non returnable
Price$42.99
ID 395-55
395-55 KTI Hydraulic Pump 2 Button Pendant Dump Remote
1 of 3
KTI Replacement removable 2-button remote w/ 7" long quick connect
  • Made of four 14 gauge wires inside a molten rubber cord.
  • Comes with one round male water tight end.
  • Features a simple "screw-in and go" design.
  • Water resistant remote dimensions: 4-3/8" x 2-1/2" x 2-1/8"
  • Remote has 2 square magnets on back for sticking to steel.
  • Comes with a large "up" button and "down" button.
  • Remote has a quick removable connection for quick replacement of remote only
  • Fits on 2015 and newer KTI power up /power down pumps.
Note 1: Does not come with extension cable
Note 2: electrical components are non returnable
Price$45.99
ID 7001-S
7001-S 4 Post Hydraulic Pump Solenoid
Hydraulic dump system solenoid for 4 wire pump systems.
  • 12 volt DC 80 AMP
  • Universal replacement solenoid for power up/gravity down hydraulic pumps.
  • Used on a vide range of dumps, tilts, and hydraulic dovetail trailers.
  • Construction is Cadmium plated bracket.

Note: electrical items are non returnable
Price$45.99
ID 74-06
74-06 KTI Hydraulic Pump 15ft Pendant Dump Remote Extension Cable
1 of 2
KTI 15-foot Pendant extension cable. Great for adding more length on your KTI hydraulic pump controller. 
  • Made of four 14 gauge wires in a molten rubber cord.
  • Comes with 1 Round Male and Female water tight ends.
  • Features a simple "screw-in and go" design.
  • Designed to fit on any 2015 and newer KTI power up/power down hydraulic pump controls
Note: electrical components are non returnable
Price$54.99
ID 391-2
391-2 KTI 4 Post Hydraulic Pump Solenoid
1 of 4
KTI Hydraulics Solenoid
  • 12 volt DC 100 AMP
  • Standard replacement solenoid for KTI power up/power down hydraulic pumps.
  • Used on a vide range of dumps, tilts, and hydraulic dovetail trailers.
  • Construction is molten plastic with zinc coated steel bracket.
Note: electrical components are non returnable
Price$59.99
ID K17025-072
K17025-072 3-Wire 20ft Pendant Hydraulic Pump Dump Remote Pendant with Cable
1 of 2
2-Button 3 wire pendant hydraulic pump controller for power up/gravity down dump systems. Plastic housing is water and impact resistant. Wires are 18 gauge. 12V, 5Amp max, 20 feet

Note: electrical items are non returnable
Price$59.99
ID K17026-072
K17026-072 4-Wire 20ft Pendant Hydraulic Pump Dump Remote Pendant with Cable
1 of 2
2-Button 4 wire pendant hydraulic pump controller for power up/power down dump systems. Plastic housing is water and impact resistant. Wires are 18 gauge. 12V, 15Amp max, 20 feet

Note: electrical items are non returnable
Price$94.99
ID 3011034
3011034 5' x 12' Heavy Duty Replacement Mesh Tarp for Roll Tarp
5' x 12' Heavy duty replacement mesh tarp only for dump trailer roll tarps systems. Get the ultimate coverage for your dump bed with a mesh vinyl tarp. The tarp is made of durable 1,000 denier polyester with a UV-resistant PVC coating. It features brass grommets and heavy duty double-stitched and reinforced hems.
Price$103.99
ID 3009455
3009455 6' x 14' Heavy Duty Replacement Mesh Tarp for Roll Tarp
6' x 14' Heavy duty replacement mesh tarp only for dump trailer roll tarps systems. Get the ultimate coverage for your dump bed with a mesh vinyl tarp. The tarp is made of durable 1,000 denier polyester with a UV-resistant PVC coating. It features brass grommets and heavy duty double-stitched and reinforced hems.
Price$128.99
ID 3008210
3008210 7' x 15' Heavy Duty Replacement Mesh Tarp for Roll Tarp
7' x 15' Heavy duty replacement mesh tarp only for dump trailer roll tarps systems. Get the ultimate coverage for your dump bed with a mesh vinyl tarp. The tarp is made of durable 1,000 denier polyester with a UV-resistant PVC coating. It features brass grommets and heavy duty double-stitched and reinforced hems.
Price$155.99
ID 3008209
3008209 7-1/2' x 15' Heavy Duty Replacement Mesh Tarp for Roll Tarp
7-1/2' x 15' Heavy duty replacement mesh tarp only for dump trailer roll tarps systems. Get the ultimate coverage for your dump bed with a mesh vinyl tarp. The tarp is made of durable 1,000 denier polyester with a UV-resistant PVC coating. It features brass grommets and heavy duty double-stitched and reinforced hems.
Price$159.99
ID 3009456
3009456 7' x 18' Heavy Duty Replacement Mesh Tarp for Roll Tarp
7' x 18' Heavy duty replacement mesh tarp only for dump trailer roll tarps systems. Get the ultimate coverage for your dump bed with a mesh vinyl tarp. The tarp is made of durable 1,000 denier polyester with a UV-resistant PVC coating. It features brass grommets and heavy duty double-stitched and reinforced hems.
Price$163.99
ID DTR5012
DTR5012 5' x 12' Mesh Roll Tarp Kit
1 of 5
5' x 12' Mesh tarp kit for dump and utility body applications offer a way of meeting local cover your load laws and helps keep debris from flying out while in transit.
  • Built for simple dump body and dump trailer tarp applications
  • Extra durable tarps feature brass grommets and heavy duty double-stitched and reinforced hems.
  • Each tarp has a standard sewn-in rear pocket to fit an optional anti-sail retention bow (sold separately).
  • All mounting hardware included.
Buyers Products DTR series dump tarp kits are built for simple dump body and dump trailer tarp applications. The durable extruded aluminum tarp roller telescopes to the exact width of your truck. The heavy duty tarps feature brass grommets with reinforced, double-stitched hems. 

All kits include: 7 in. folding crank with detent, tarp roller, a 20 ft pull-rope, rope tie down hooks, mounting brackets, and two rubber tarp straps with S-hooks.
Price$235.99
ID 3022117
3022117 8' x 18' Heavy Duty Replacement Mesh Tarp for Roll Tarp
8' x 18' Heavy duty replacement mesh tarp only for dump trailer roll tarps systems. Get the ultimate coverage for your dump bed with a mesh vinyl tarp. The tarp is made of durable 1,000 denier polyester with a UV-resistant PVC coating. It features brass grommets and heavy duty double-stitched and reinforced hems.
Price$243.99
ID DTR6014
DTR6014 6' x 14' Mesh Roll Tarp Kit
1 of 5
6' x 14' Mesh tarp kit for dump and utility body applications offer a way of meeting local cover your load laws and helps keep debris from flying out while in transit.
  • Built for simple dump body and dump trailer tarp applications
  • Extra durable tarps feature brass grommets and heavy duty double-stitched and reinforced hems.
  • Each tarp has a standard sewn-in rear pocket to fit an optional anti-sail retention bow (sold separately).
  • All mounting hardware included.
Buyers Products DTR series dump tarp kits are built for simple dump body and dump trailer tarp applications. The durable extruded aluminum tarp roller telescopes to the exact width of your truck. The heavy duty tarps feature brass grommets with reinforced, double-stitched hems. 

All kits include: 7 in. folding crank with detent, tarp roller, a 20 ft pull-rope, rope tie down hooks, mounting brackets, and two rubber tarp straps with S-hooks.
Price$260.99
« Previous12 »