Filter Results
Sort Order
Jack Type
Manufacturer
Home
» A-Frame Jacks
ID RDJ-2K
RDJ2K 3000 lb Capacity Variable Height Top-wind Ultimate A-Frame Tongue Jack
1 of 4

Topwind variable height adjustable trailer tongue jack used with trailers that have an a-frame coupler. Easy bolt-on installation. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories and comes with a standard foot pad.

  • 3,000lb Support Capacity / 2,000lb Lift Capacity
  • Pre-installed mounting plate fits all standard a-frame couplers
  • Includes standard foot pad
  • Quick release locking pin allows for faster operation of the trailer jack
  • All metal construction for value and durability
  • Interior roller bearings for product performance, easier cranking power, and trailer jack longevity
  • Zinc-coated trailer jack for maximum corrosion resistance
  • Rapid quick-release adjustment saves time
  • Variable rapid height adjustments with seven available hole settings - set 2" apart
  • No extra blocks are needed under the trailer jack to gain extra height
  • Easy comfort grip handle for safe cranking
  • Retracts flush with the bottom of the trailer to eliminate potential damage to the jack and trailer
  • Outer tube diameter of outside tube is 2-1/4"
  • Outer tube diameter of inside tube is 2"
  • Leg extends 15-1/2"

Dimensions see image:
These numbers are variable due to the type of rapid adjustment for the jack

  • (A) Retracted = 2" up to 14-1/4"
  • (B) Extended = 17-1/2" up to 29-1/2"
  • (C) Clearance = 7" up to 19"

The Ultimate Trailer Jack was designed for the ultimate convenience, speed, and simplicity. Just pull the easy-to-access release pin to drop the entire jack tube down for quick adjustments. Even better, there is no longer any need for space fillers with this jack, so put away the drop leg, blocks, and bricks! With this jack, setting up your trailer at your destination has never been easier.

The jack features an outer tube that extends to provide extra lift. Pulling the release pin and dropping the outer tube gives rapid adjustments of lift, ensuring a solid foundation with the ground. Keep setting your worries aside with the Ultimate Trailer Jack because its compact profile keeps the jack flush with the trailer frame when it's retracted. You no longer have to worry about catching your jack on uneven terrain while you tow.

The Ultimate Trailer Jack is easy-to-use, quick, and dependable. If you're looking to spend less time setting up your trailer and more time doing the things that make you happy, then the Ultimate Trailer Jack is for you.

Price$89.99
ID TJA-2000-B
TJA-2000-B 3000 lb Capacity Top-wind A-Frame Tongue Jack
1 of 6

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

  • 3,000lb Support Capacity / 2,000lb Lift Capacity
  • Pre-installed mounting plate fits all standard a-frame couplers
  • Large grooved comfort handle to operate the jack
  • Durable exterior grade black finish on outer and inner tubes
  • Outer tube diameter of outside tube is 2-1/4"
  • Outer tube diameter of inside tube is 2"
  • Handle arms have a durable zinc finish
  • Can be bolt-on or weld-on
  • Mounts to all standard A-frame couplers
  • Leg extends 14-1/4"

Dimensions see image

  • (A) Retracted = 8"
  • (B) Extended = 22-1/4"
  • (C) Clearance = 12-3/4"
Price$37.99
ID TJA-2001-B
TJA-2001-B 3000 lb Capacity Top-wind A-Frame Tongue Jack
1 of 6

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories. Low mounting base for better ground clearance.

  • 3,000lb Support Capacity / 2,000lb Lift Capacity
  • Pre-installed mounting plate fits all standard a-frame couplers
  • Large grooved comfort handle to operate the jack
  • Durable exterior grade black finish on outer and inner tubes
  • Outer tube diameter of outside tube is 2-1/4"
  • Outer tube diameter of inside tube is 2"
  • Handle arms have a durable zinc finish
  • Can be bolt-on or weld-on
  • Mounts to all standard A-frame couplers
  • Leg extends 14-1/2"

Dimensions see image

  • (A) Retracted = 4-1/2"
  • (B) Extended = 19"
  • (C) Clearance = 14-1/2"
Price$37.99
ID TJA-2001S-B
TJA-2001S-B 3000 lb Capacity Side-wind A-Frame Tongue Jack
1 of 6

RAM Sidewind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

  • 3,000lb Support Capacity / 2,000lb Lift Capacity
  • Pre-installed mounting plate fits all standard a-frame couplers
  • Large grooved comfort handle to operate the jack
  • Durable exterior grade black finish on outer and inner tubes
  • Outer tube diameter of outside tube is 2-1/4"
  • Outer tube diameter of inside tube is 2"
  • Handle arms have a durable zinc finish
  • Can be bolt-on or weld-on
  • Mounts to all standard A-frame couplers
  • Leg extends 15"

Dimensions see image

  • (A) Retracted = 9"
  • (B) Extended = 24-1/8"
  • (C) Clearance = 14-3/4"
Price$46.99
ID TJA-5000T-B
TJA-5000T-B 5000 lb Capacity Top-wind A-Frame Tongue Jack
1 of 6

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 3,000lb capacity lift and 5,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

  • 5,000lb Support Capacity / 3,000lb Lift Capacity
  • Pre-installed mounting plate fits all standard a-frame couplers
  • Comfortable claw knob handle to operate the jack
  • Durable exterior grade black finish on outer and inner tubes
  • Outer tube diameter of outside tube is 2-1/4"
  • Outer tube diameter of inside tube is 2"
  • Handle arms have a durable zinc finish
  • Can be bolt-on or weld-on
  • Mounts to all standard A-frame couplers
  • Leg extends 15"

Dimensions see image

  • (A) Retracted = 10"
  • (B) Extended = 25"
  • (C) Clearance = 12-1/2"
Price$54.99
ID TJDA-8000
TJDA-8000 8000 lb Top-wind Drop Leg A-frame Trailer Jack
1 of 7

RAM Topwind a-frame mount square trailer jack with drop leg. Rated for 7,000lb capacity lift and 8,000lb capacity supporting weight limits. Comes standard with a black painted outer tube and durable zinc coated inner tube. Includes extendable drop leg with quick pin for easy adjustment. Comes with grease zerk already pressed in for easy greasing of the jack. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility and cargo trailers. This jack is most commonly used on dump trailers and is ideal for improving ground clearance.

This A-frame Drop leg jack is designed to be a bolt on to the a-frame of your trailer coupler as long as is has a square cut out.

  • 8,000lb Support Capacity / 7,000lb Lift Capacity
  • Comfortable claw knob to operate the jack
  • Durable exterior grade black finish on outer tube and clear zinc finish on inner tube and drop leg foot
  • 2-1/2″ square outer tube construction
  • Grease zerk for easy greasing of jack
  • Adjustable height bottom leg with 6" x 8" foot plate included
  • Intermediate leg extends 13-3/4"
  • Drop leg with pull pin extends up to 15"

Dimensions see image

  • (A) Retracted = 8"
  • (B) Extended = 36"
  • (C) Clearance = 16-1/4"
Price$79.99