parts and accessories at Freeway Trailer Sales

ID 16272

16272 2.32" Chrome Bearing Protector with Bra Set

16272 2.32" Chrome Bearing Protector with Bra - Sold as a pair

Why use a Bearing Protector?

Boat trailer hubs get warm while traveling to the ramp. Warm hubs backed into cool water during launching are suddenly cooled which contracts any air inside the hub creating a vacuum. The vacuum pulls water and road grit inside the hub contaminating the grease. The contamination causes corrosion and rapid wear. Perfectly good bearings can be ruined in less than one season.

Bearing Protectors corrects this problem by filling the entire hub with grease. Most air that is trapped inside the hub will be expelled by the Bearing Protector pressure relief feature. Once the hub is full, the spring loaded piston in the Bearing Protector exerts a slight pressure to the grease inside the hub. With the pressure inside the hub slightly higher than the pressure outside the hub, water and grit cannot be drawn inside.

An automatic pressure relief feature prevents over-filling the hub which would damage seals.

Fits hubs with an inner diameter of 2.32"
Chrome Plated

Sold as a pair

Price$36.99

ID 16273

16273 2.44" Chrome Bearing Protector with Bra Set

16273 2.44" Chrome Bearing Protector with Bra - Sold as a pair

Why use a Bearing Protector?

Boat trailer hubs get warm while traveling to the ramp. Warm hubs backed into cool water during launching are suddenly cooled which contracts any air inside the hub creating a vacuum. The vacuum pulls water and road grit inside the hub contaminating the grease. The contamination causes corrosion and rapid wear. Perfectly good bearings can be ruined in less than one season.

Bearing Protectors corrects this problem by filling the entire hub with grease. Most air that is trapped inside the hub will be expelled by the Bearing Protector pressure relief feature. Once the hub is full, the spring loaded piston in the Bearing Protector exerts a slight pressure to the grease inside the hub. With the pressure inside the hub slightly higher than the pressure outside the hub, water and grit cannot be drawn inside.

An automatic pressure relief feature prevents over-filling the hub which would damage seals.

Fits hubs with an inner diameter of 2.44"
Chrome Plated

Sold as a pair

Price$36.99

ID W2343

1 of 2

W2343 Emergency 3 Piece LED Road Flare Kit

Performance Tool LED safety flares can make others aware of your vehicle for an unexpected roadside emergency, whether it's a flat tire or a dead battery. These innovative LED safety devices have tough, rugged plastic construction that is compact and lightweight, and they feature five modes of operation: 3 LED area light, rotating, blinking, flashing, and 12 LED light function. The units offer up to 50 hours of run time. They come equipped with a swivel hook and magnet on the back for hands-free use. To turn-off the LED safety flares, simply press and hold them down for three seconds. This is a safety device that no driver should be without!

5 modes of operation:

Area Light
Rotating
Blinking
Flashing
12 LED constant light

Batteries Included

Price$36.99

ID TJA-2000-B

1 of 6

TJA-2000-B 3000 lb Capacity Top-wind A-Frame Tongue Jack

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 14-1/4"

Dimensions see image

(A) Retracted = 8"
(B) Extended = 22-1/4"
(C) Clearance = 12-3/4"

Price$37.99

ID TJA-2001-B

1 of 6

TJA-2001-B 3000 lb Capacity Top-wind A-Frame Tongue Jack

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories. Low mounting base for better ground clearance.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 14-1/2"

Dimensions see image

(A) Retracted = 4-1/2"
(B) Extended = 19"
(C) Clearance = 14-1/2"

Price$37.99

ID TR4108

1 of 4

TR4108 3500lb 5 on 4-1/2" Bolt Pattern Hub Kit with 1-1/16" and 1-3/8" Bearing Set

Import TR4108 idler hub kit fits 2990lb to 3500lb capacity axles and has a 5 on 4-1/2" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands.

Kit includes:

1 - Idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- 6-1/4" diameter flange
- 4-1/8" overall height
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs. capacity per side
1 - L44649 bearing
- 1-1/16" (1.063") inner diameter
1 - L68149 bearing
- 1-3/8" (1.378") inner diameter
1 - L44610 outer bearing race (pre-installed)
1 - L68111 inner bearing race (pre-installed)
1 - 171255TB Grease seal (see note for alternate seal option)
- 1.719" inner diameter
- 2.565" outer diameter
1 - 1.98" outer diameter lube style cap and rubber plug
5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Please note: This kit is not pre-greased or pre-assembled as this hub set can also fit trailer axles that have a grease seal inner diameter of 1.687" part #168255TB. If ordering for this seal size please let us know in the order comments and we will swap out the seal in the kit for the correct size at no additional charge.

Price$37.99

ID W54175

1 of 4

W54175 Bearing Packer

Simplify your trailer repair with the Performance Tool W54175 Bearing Packer. This handy tool allows you to efficiently pack wheel bearings by hand, ensuring proper lubrication and extending the life of your trailer wheel bearings. Whether you're a seasoned Do-it-Yourselfer or a beginner, this bearing packer is a must-have for any maintenance toolbox.

Use to repack bearings with fresh grease
Works on bearings up to 3.5 inches OD
No more mess using the palm of your hand to repack the bearing
Grease stays uncontaminated in the bearing packer, using the dust cover for storage
Very simple to use
Impact resistant clear body for level and grease type check
Fully self-contained, saves time and is totally portable so it can be used anywhere

Price$37.99