250-015522-10 EZ Loader Spring Hanger

The Fastway® FLIP™ 88-00-4500 jack foot extends your trailer jack by 4 inches, and saves you 48 cranks both up and down. The FLIP has two times more contact surface area than other jack feet, providing more stability for your trailer.

The Flip installs in seconds with no tools needed for most applications, and fits nearly every 2-1/4" tongue jack with a standard 2" lower pipe.

The Flip eliminates the need to search for rocks or wood blocks to put under your trailer jack. It is the only jack foot that is completely automatic as the Flip extends down and locks into place when jack is extended, then tucks up under the trailer frame when towing. It easily removes for low clearance situations, and fits virtually every bumper-pull trailer: horse, travel, cargo, RV, ATV, and flat bed.

The Fastway® FLIP™ 88-00-6500 jack foot extends your trailer jack by 6 inches, and saves you 48 cranks both up and down. The FLIP has two times more contact surface area than other jack feet, providing more stability for your trailer.

The Flip installs in seconds with no tools needed for most applications, and fits nearly every 2-1/4" tongue jack with a standard 2" lower pipe.

The Flip eliminates the need to search for rocks or wood blocks to put under your trailer jack. It is the only jack foot that is completely automatic as the Flip extends down and locks into place when jack is extended, then tucks up under the trailer frame when towing. It easily removes for low clearance situations, and fits virtually every bumper-pull trailer: horse, travel, cargo, RV, ATV, and flat bed.

Dexter 8-258-5 Large flange idler hub fits 1250lb to 2200lb capacity axles and has a 5 on 4-1/2" bolt pattern. Compatible all with BT(1" bearing combination) or BTR(1-1/16" bearing combination) style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands. This hub has a 6-1/4" diameter large flange for use with 13", 14", and 15" trailer wheels.

• 1 - Large face Idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • 6-1/4" diameter large flange
  • 4-1/8" overall height
  • 1/2"-20 thread pitch lug studs
  • has a 1.98" bore diameter
  • Rated 1100 lbs. capacity per side(bearing size dependent)
• 2 - L44610 bearing races (pre-installed)

This trailer idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

For use with 13", 14" or 15" wheels

Please note: will not work on 8" wheels.