parts and accessories at Freeway Trailer Sales

ID EJ-3520-BBX

1 of 7

EJ-3520-BBX 3500lb capacity Black Top Electric Tongue Jack

RAM 3,500lb Black top cowling heavy duty electric trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 3,500lb lift capacity. Easy to operate with just a flip of the switch.

Durable exterior grade black powder-coat finish on outer tube. Zinc finish inner tube with removable 4-3/4" diameter sand foot. Bright white LED light for easy night time hookup. Durable hardened steel gears for year and years of normal use. Crank handle for manual override in case of power loss.

Grounds thru the a-frame mounting plate. Includes a 57" single fused power wire to connect with a full size 12 volt RV/Marine deep cycle battery (battery not included).

Typically used on travel trailers, cargo, utility and other trailer types with a frame couplers.

3,500lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Easy to operate with just a flip of the switch
Durable exterior grade black outer tube and zinc inner tube
Zinc finish inner tube with removable sand foot
Includes drop leg for 7-1/2″ of additional adjustment
Bright white LED light for easy night time hookup
Durable hardened steel gears for years and of normal use
Crank handle for manual override in case of power loss
Setup for use with a 12 volt RV/Marine deep cycle battery (battery not included)
57″ single wire to hook up to trailer battery (self grounding thru mounting plate)
Can be bolt-on or weld-on
Intermediate leg extends 18"
Drop leg with pull pin extends up to 5-3/4"

Dimensions see image

(A) Retracted = 9.75"
(B) Extended = 33-1/2"
(C) Clearance = 20-1/2"

Price$224.99

ID EJ-3520-WBX

1 of 7

EJ-3520-WBX 3500lb capacity White Top Electric Tongue Jack

RAM 3,500lb White top cowling heavy duty electric trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 3,500lb lift capacity. Easy to operate with just a flip of the switch.

Durable exterior grade black powder-coat finish on outer tube. Zinc finish inner tube with removable 4-3/4" diameter sand foot. Bright white LED light for easy night time hookup. Durable hardened steel gears for year and years of normal use. Crank handle for manual override in case of power loss.

Grounds thru the a-frame mounting plate. Includes a 57" single fused power wire to connect with a full size 12 volt RV/Marine deep cycle battery (battery not included).

Typically used on travel trailers, cargo, utility and other trailer types with a frame couplers.

3,500lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Easy to operate with just a flip of the switch
Durable exterior grade black outer tube and zinc inner tube
Zinc finish inner tube with removable sand foot
Includes drop leg for 7-1/2″ of additional adjustment
Bright white LED light for easy night time hookup
Durable hardened steel gears for years and of normal use
Crank handle for manual override in case of power loss
Setup for use with a 12 volt RV/Marine deep cycle battery (battery not included)
57″ single wire to hook up to trailer battery (self grounding thru mounting plate)
Can be bolt-on or weld-on
Intermediate leg extends 18"
Drop leg with pull pin extends up to 5-3/4"

Dimensions see image

(A) Retracted = 9.75"
(B) Extended = 33-1/2"
(C) Clearance = 20-1/2"

Price$224.99

ID MJ-1200B

1 of 8

MJ-1200B 1200 lb Sidewind Bolt-on Marine Swivel Jack with 6-inch Wheel

RAM Sidewind bolt-on swing up swivel marine trailer jack. Easily bolts around trailer frames that are 2", 3" 4" or 5" tall. Rated for 1,200lb supporting and lift capacity weight limits. Includes swivel wheel for easy maneuvering. Ideal for use with boat, sport craft, snowmobile and other recreational trailers.

Bolt-on swivel jack is typically used on marine trailers. Jack has a zinc coating to help resist corrosion. Jack has spring loaded pin to make the swivel process quick and easy. When trailer is connected to tow vehicle jack can be quickly swiveled up and out of the way for traveling. Then when the trailer needs to be disconnected the jack can just as easily swiveled down to lift trailer.

1,200lb Support/Lift Capacity
Large 1/2″ pull pin to activate the swivel mechanism
Large grooved comfort handle to operate the jack
Four bolt pin through bracket design with large diamond shaped washer for side load support
Durable clear zinc finish for added corrosion resistance
Bolt on hardware included to mount to 2", 3" 4" or 5" tall trailer frames
Single 6″ poly caster wheel
Leg extends 10"

Dimensions see image

(A) Retracted = 12-1/2"
(B) Extended = 23-1/2"
(C) Clearance = 10-1/2"

Price$59.99

ID MJ-1500B

1 of 8

MJ-1500B 1500 lb Sidewind Bolt-on Marine Swivel Jack with 8-inch Wheel

RAM Sidewind bolt-on swing up swivel marine trailer jack. Easily bolts around trailer frames that are 2", 3" 4" or 5" tall. Rated for 1,500lb supporting and lift capacity weight limits. Includes swivel wheel for easy maneuvering. Ideal for use with boat, sport craft, snowmobile and other recreational trailers.

Bolt-on swivel jack is typically used on marine trailers. Jack has a zinc coating to help resist corrosion. Jack has spring loaded pin to make the swivel process quick and easy. When trailer is connected to tow vehicle jack can be quickly swiveled up and out of the way for traveling. Then when the trailer needs to be disconnected the jack can just as easily swiveled down to lift trailer.

1,500lb Support/Lift Capacity
Large 1/2″ pull pin to activate the swivel mechanism
Large grooved comfort handle to operate the jack
Four bolt pin through bracket design with large diamond shaped washer for side load support
Durable clear zinc finish for added corrosion resistance
Bolt on hardware included to mount to 2", 3" 4" or 5" tall trailer frames
Single 8″ poly caster wheel
Leg extends 10"

Dimensions see image

(A) Retracted = 14"
(B) Extended = 24-3/4"
(C) Clearance = 12-3/4"

Price$69.99

ID MJSQ-2500B

1 of 7

MJSQ-2500B 2500 lb Bolt-On Marine Trailer Tongue Jack with Drop Leg

RAM Sidewind heavy-duty bolt-on square marine trailer jack with drop leg. Easily bolts around trailer frames that are 2", 3" 4" or 5" tall. Rated for 2,500lb supporting and lift capacity weight limits. Includes extendable drop leg with quick pin for easy adjustment. Ideal for use with boat, sport craft, snowmobile and other recreational trailers. Features a low profile drop leg and extending tube for added ground clearance.

2,500lb Support/Lift Capacity
2-1/4″ outside square tube construction
Grease zerk for easy greasing of jack
Large grooved comfort handle to operate the jack
Durable clear zinc finish for added corrosion resistance
Bolt on hardware included to mount to 2", 3" 4" or 5" tall trailer frames
Adjustable height bottom leg with 4" x 7" foot plate included
Intermediate leg extends 15"
Drop leg with pull pin extends up to 13-1/2"

Dimensions see image

(A) Retracted = 7"
(B) Extended = 35-1/2"
(C) Clearance = 17-1/2"

Price$98.99

ID TJA-2000-B

1 of 6

TJA-2000-B 3000 lb Capacity Top-wind A-Frame Tongue Jack

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 14-1/4"

Dimensions see image

(A) Retracted = 8"
(B) Extended = 22-1/4"
(C) Clearance = 12-3/4"

Price$37.99

ID TJA-2001-B

1 of 6

TJA-2001-B 3000 lb Capacity Top-wind A-Frame Tongue Jack

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories. Low mounting base for better ground clearance.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 14-1/2"

Dimensions see image

(A) Retracted = 4-1/2"
(B) Extended = 19"
(C) Clearance = 14-1/2"

Price$37.99

ID TJA-2001S-B

1 of 6

TJA-2001S-B 3000 lb Capacity Side-wind A-Frame Tongue Jack

RAM Sidewind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Large grooved comfort handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 15"

Dimensions see image

(A) Retracted = 9"
(B) Extended = 24-1/8"
(C) Clearance = 14-3/4"

Price$46.99

ID TJA-5000T-B

1 of 6

TJA-5000T-B 5000 lb Capacity Top-wind A-Frame Tongue Jack

RAM Topwind trailer tongue jack used with trailers that have an a-frame coupler. Can be welded or bolted in place. Rated for 3,000lb capacity lift and 5,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories.

5,000lb Support Capacity / 3,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Comfortable claw knob handle to operate the jack
Durable exterior grade black finish on outer and inner tubes
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Handle arms have a durable zinc finish
Can be bolt-on or weld-on
Mounts to all standard A-frame couplers
Leg extends 15"

Dimensions see image

(A) Retracted = 10"
(B) Extended = 25"
(C) Clearance = 12-1/2"

Price$54.99

ID TJB-2001-B

1 of 7

TJB-2001-B 3000 lb Weld-on Topwind Snap Ring Swivel Jack

RAM Topwind snap-ring swivel trailer tongue jack comes with a mounting bracket for weld-on applications to side of trailer frame. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility trailers. Features a universal snap ring so if you are just replacing your tongue jack, you would not need to weld on the new bracket. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits.

3,000lb Support Capacity / 2,000lb Lift Capacity
Comfortable claw knob handle to operate the jack
Durable exterior grade black finish on outer tube
Clear zinc finish on inner tube and foot
Large 1/2″ pull pin to activate the swivel mechanism
Grease zerk for easy greasing of jack
Deep seated snap ring for side load support and raw weld on bracket
4″ x 7″ welded on durable zinc bottom foot for better stability
Leg extends 10"

Dimensions see image

(A) Retracted = 11"
(B) Extended = 21"
(C) Clearance = 5-3/4"

Price$54.99

ID TJD-12000SP-R2

1 of 6

TJD-12000SP-R2 12000 lb Weld-On Square Tube Side-wind Jack with Spring Return Drop Leg

RAM Sidewind weld-on square trailer jack with drop leg. Rated for 10,000lb capacity lift and 12,000lb capacity supporting weight limits. Comes standard with a black painted outer tube and inner tube. Includes extendable drop leg with spring loaded return and is ideal for use with ag, industrial, commercial, and many other types of trailers that have a need for heavy lifting. Designed to welded directly to trailer frame. This jack is most commonly used on dump trailers and is ideal for improving ground clearance.

12,000lb Support Capacity / 10,000lb Lift Capacity
Direct weld single speed side wind jack
Durable exterior grade black finish on outer and inner tubes
4″ square outer tube construction
Grease zerks for easy greasing of jack
Adjustable height bottom spring loaded return leg with 8" x 8" foot plate included
Large octagon bushings on gear shaft for better function
Handle and clip included
Intermediate leg extends 12-1/4"
Drop leg extends up to 13-1/2"

Dimensions see image

(A) Retracted = 28"
(B) Extended = 54"

Price$259.99

ID TJD-7000

1 of 6

TJD-7000 8000 lb Top-wind Drop leg Trailer Jack

RAM Topwind weld-on square trailer jack with drop leg. Rated for 7,000lb capacity lift and 8,000lb capacity supporting weight limits. Comes standard with a black painted outer tube and durable zinc coated inner tube. Includes extendable drop leg with quick pin for easy adjustment. Comes with grease zerk already pressed in for easy greasing of the jack. Jack is ideal for use with ag, industrial, commercial, recreational, and many other types of utility and cargo trailers. This jack is most commonly used on dump trailers and is ideal for improving ground clearance.

8,000lb Support Capacity / 7,000lb Lift Capacity
Comfortable claw knob to operate the jack
Durable exterior grade black finish on outer tube and clear zinc finish on inner tube and drop leg foot
2-1/2″ square outer tube construction
Grease zerk for easy greasing of jack
Adjustable height bottom leg with 6" x 8" foot plate included
Intermediate leg extends 15-1/4"
Drop leg with pull pin extends up to 13-1/2"

Dimensions see image

(A) Retracted = 24"
(B) Extended = 52-3/4"

Price$74.99