parts and accessories at Freeway Trailer Sales

ID 2-150A-04-0300

1 of 6

2-150A-04-0300 2200lb SHORTY 5 on 4-1/2" Bolt Pattern Hub Kit with 1-1/16" Bearing Set

Complete BT150A Shorty idler hub kit for 1250lb to 2200lb capacity axles and use a 1-1/16" inner diameter bearing combination on a straight shaft spindle. This hub has a 5-1/2" diameter flange.

Kit includes:

1 -BT150A Idler hub with a 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- 5-1/2" diameter flange
- 3-1/2" overall height
- 1/2"-20 thread pitch lug studs
- Rated 1100 lbs. capacity per side
2 - L44649 bearings
- 1-1/16" (1.063") inner diameter
2 - L44610 bearing races (pre-installed)
1 - 12192TB Grease sea
- 1.249" inner diameter
- 1.987" outer diameter
1 - 1.98" outer diameter standard style cap
5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts

For use with 8", 10" and 12" wheels only

Please note: This is a specialty hub kit and normally only fits older EZ Loader and Loadrite boat trailers, and some older agricultural trailer axles. Please verify the overall height before ordering. This kit is not pre-assembled or pre-greased.

Price$85.99

ID RDJ-2K

1 of 4

RDJ2K 3000 lb Capacity Variable Height Top-wind Ultimate A-Frame Tongue Jack

Topwind variable height adjustable trailer tongue jack used with trailers that have an a-frame coupler. Easy bolt-on installation. Rated for 2,000lb capacity lift and 3,000lb capacity supporting weight limits. Bottom tube is pre drilled to accept standard trailer jack accessories and comes with a standard foot pad.

3,000lb Support Capacity / 2,000lb Lift Capacity
Pre-installed mounting plate fits all standard a-frame couplers
Includes standard foot pad
Quick release locking pin allows for faster operation of the trailer jack
All metal construction for value and durability
Interior roller bearings for product performance, easier cranking power, and trailer jack longevity
Zinc-coated trailer jack for maximum corrosion resistance
Rapid quick-release adjustment saves time
Variable rapid height adjustments with seven available hole settings - set 2" apart
No extra blocks are needed under the trailer jack to gain extra height
Easy comfort grip handle for safe cranking
Retracts flush with the bottom of the trailer to eliminate potential damage to the jack and trailer
Outer tube diameter of outside tube is 2-1/4"
Outer tube diameter of inside tube is 2"
Leg extends 15-1/2"

Dimensions see image:
These numbers are variable due to the type of rapid adjustment for the jack

(A) Retracted = 2" up to 14-1/4"
(B) Extended = 17-1/2" up to 29-1/2"
(C) Clearance = 7" up to 19"

The Ultimate Trailer Jack was designed for the ultimate convenience, speed, and simplicity. Just pull the easy-to-access release pin to drop the entire jack tube down for quick adjustments. Even better, there is no longer any need for space fillers with this jack, so put away the drop leg, blocks, and bricks! With this jack, setting up your trailer at your destination has never been easier.

The jack features an outer tube that extends to provide extra lift. Pulling the release pin and dropping the outer tube gives rapid adjustments of lift, ensuring a solid foundation with the ground. Keep setting your worries aside with the Ultimate Trailer Jack because its compact profile keeps the jack flush with the trailer frame when it's retracted. You no longer have to worry about catching your jack on uneven terrain while you tow.

The Ultimate Trailer Jack is easy-to-use, quick, and dependable. If you're looking to spend less time setting up your trailer and more time doing the things that make you happy, then the Ultimate Trailer Jack is for you.

Price$89.99

ID B12H-73

B12H-73 12" x 2" Left Hand Dacromet Free-Backing Hydraulic Trailer Brake

The B12H-73 12" x 2" Left Hand Free Backing Hydraulic Dacromet Brake Assembly - 6'000lb Capacity Per Pair.

This hydraulic brake assembly includes standard features such as Dacromet backing plates, Stainless steel hardware, uni-servo aluminum wheel cylinder and glued shoes linings for long life, especially for the marine applications. Marine-grade hydraulic drum brake assembly is great for boat trailers. Designed for use with surge-type trailer brake actuators. Corrosion-resistant Dacromet steel construction.

Free backing assembly incorporates a “fall-away” shoe which diminishes shoe drag when backing up. Requires periodic manual adjustment. Marine cluster has galvanized back plate, stainless steel spring hardware, aluminum wheel cylinder and glued marine brake shoe linings. Free-backing brakes let your trailer move in reverse without the brakes being activated by your surge actuator. This brake is used in drum surge applications and are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse.

Left hand (Driver's side)
Free backing
Dacromet corrosion resistant coating
For use with a 12" inside diameter drum
Rated for 6,000lb axles (3,000lbs each)
Standard 5 on 3-7/8"" center bolt mount flange - universally fits all standard axle flange bolt pattern.

Price$91.99

ID B12H-74

B12H-74 12" x 2" Right Hand Dacromet Free-Backing Hydraulic Trailer Brake

The B12H-74 12" x 2" Right Hand Free Backing Hydraulic Dacromet Brake Assembly - 6'000lb Capacity Per Pair.

This hydraulic brake assembly includes standard features such as Dacromet backing plates, Stainless steel hardware, uni-servo aluminum wheel cylinder and glued shoes linings for long life, especially for the marine applications. Marine-grade hydraulic drum brake assembly is great for boat trailers. Designed for use with surge-type trailer brake actuators. Corrosion-resistant Dacromet steel construction.

Free backing assembly incorporates a “fall-away” shoe which diminishes shoe drag when backing up. Requires periodic manual adjustment. Marine cluster has galvanized back plate, stainless steel spring hardware, aluminum wheel cylinder and glued marine brake shoe linings. Free-backing brakes let your trailer move in reverse without the brakes being activated by your surge actuator. This brake is used in drum surge applications and are needed if your actuator does not have a reverse lockout, which is a mechanism that ensures that the actuator does not activate when your rig moves in reverse.

Right hand (Passenger's side)
Free backing
Dacromet corrosion resistant coating
For use with a 12" inside diameter drum
Rated for 6,000lb axles (3,000lbs each)
Standard 5 on 3-7/8"" center bolt mount flange - universally fits all standard axle flange bolt pattern.

Price$91.99

ID HD655DRUM

1 of 5

HD655DRUM 6000lb 6 on 5-1/2" Bolt Pattern 12" Brake Drum

Import 12" hub and drum fits 5000lb and 6000lb capacity axles and has a 6 on 5-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 3000 lbs. capacity per side
1 - 15245 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 15123 outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which has a 1.250" inner diameter. This drum uses a 15123 outer bearing which is the same bearing inner diameter and will fit the 5000lb and 5200lb axles. The only difference is the outer bore of the drum. If you have LM67048 outer bearings then we recommend buying the 15123 bearing that fits this.

Price$91.99

ID 12HD865DRUM

1 of 5

12HD865DRUM 7000lb 8 on 6-1/2" Bolt Pattern 12" Brake Drum with 1/2" Lug Studs

Import 12" hub and drum fits 7000lb capacity axles and has a 8 on 6-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
1/2"-20 thread pitch lug studs
Rated 3500 lbs. capacity per side
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 14125A outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$94.99

ID 916HD865DRUM

1 of 5

916HD865DRUM 7000lb 8 on 6-1/2" Bolt Pattern 12" Brake Drum with 9/16" Lug Studs

Import 12" hub and drum fits 7000lb capacity axles and has a 8 on 6-1/2" bolt pattern. Compatible with electric and hydraulic drum brake systems. Compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination.

1 - Integrated hub-and-drum with 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)

Works with 12" x 2" hydraulic and electric trailer brakes
9/16"-18 thread pitch lug studs
Rated 3500 lbs. capacity per side
1 - 14276 outer bearing cup race (pre-installed)
1 - 25520 inner bearing cup race (pre-installed)
Works with 14125A outer bearing cone and 25580 inner bearing cone (not included)

This trailer brake hub and drum is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Price$94.99