This replacement spring bar chain kit is designed to fit a variety of weight distribution hitch brands, including trunnion bar and round bar. The chains help attach the spring bars to the trailer, using hookup brackets, and provide easy spring bar tension adjustment. This kit includes two complete spring bar chains with two U-bolts, four lock nuts and four washers.

• Compatible with all weight distribution hitch spring bars (except Curt TruTrack)
• Zinc Finish
• Easily attaches to spring bars with the included U-bolts
• Multiple chain links allow for flexible adjustment of tension
• Includes four 3/8" lock-nuts, four 3/8" flat washers, two chains and two U-bolts

Note: Spring bars and hookup brackets are not included

This replacement retainer kit is made to fit round bar weight distribution hitches. It includes two retainer clips, two locking pins and two rivets.

• For use with select CURT round bar weight distribution hitches
• Designed to keep spring bars attached to the WD head
• Zinc finish

Notes:

• Includes two clips, two locking pins and two rivets

A sway control unit is an inexpensive solution to the problem of a wandering trailer. This CURT sway control unit is designed to attach to your vehicle and trailer at the coupling point and counteract any lateral movement in your trailer, keeping your tow load straighter on the road and giving you more control over your vehicle. The sway bar uses a material like that used in brake pads to provide the necessary resistance while still allowing your vehicle to complete proper turns with your trailer attached. The sway control mounts onto the frame of your trailer and connects to the vehicle's weight distribution ball mount using a separate trailer ball from that used for coupling the trailer.

The CURT sway control is adjustable and easy to install. Comes with a sway unit, a trailer-mounted attachment ball and bolts, a hitch-mounted attachment ball, a mount reinforcement plate and attachment clips.

• Helps limit lateral trailer movement to reduce sway
• Fits most weight distribution hitches
• Can be mounted on either side of trailer frame
• Spacer plate ensures proper alignment of trailer ball attachment
• Features adjustment bolt to accommodate different load sizes
• On / Off handle makes it easy to engage or disengage sway control as needed
• Two sway control units recommended for larger trailers
• Compatible with most A-frame trailers (some drilling required)

Notes: If using a standard ball and mount additional bolt on sway adapter plate may be needed part# 26003

Bolt-on sway control adapter attaches to standard Class III or Class IV 2" x 2" square ball mounts to provide a mounting point for friction sway controls without the need to have a weight distributing hitch system.

The ball mount platform must be between 2-1/2" wide and have a 1" ball hole. The adapter is made of 3/8" thick material and mounts under the hitch ball. A hitch ball with an extra long shank may be required.

Allows for installing a trailer sway control kit onto a regular ball mount part# 17203

12k Round Bar Weight Distribution Hitch Package