Filter Results
Sort Order
Manufacturer

From a-frame to straight pole bolt on couplers we offer a wide selection of trailer couplers. We carry specialty channel mount, Lunette rings, and pintle coupler options. Got a boat trailer? We also offer a large selection of hydraulic drum and disk brake surge style couplers.

Home
» All Products
« Previous12 »
ID 097-022-00
097-022-00 Plastic Top Cap for UFP Actuators
1 of 2

This 2-1/2" plastic cap is a direct replacement for all UFP/Dexter actuators. It is the outer access cap that covers the master cylinder fill plug.

Price$4.99
ID 071-669-00
071-669-00 Side Reverse Lockout for UFP Actuators
1 of 2

Side reverse lockout for UFP/Dexter actuators

Price$9.99
ID 87070
87070 1 7/8" Ball - 2" Channel Bolt-On Coupler
  • Ball size: 1-7/8 inch
  • Inside channel width: 2 inch
  • Maximum gross trailer weight: 2,000 pounds
  • Easy bolt on application
  • Husky straight coupler includes a safety pin as an additional means of securing the ball clamp in a locked position (safety pin is required to be used at all times) and a safety chain to eliminate loss of the safety pin
  • The quick release assembly allows for fast and safe locking and unlocking of the ball clamp for convenient hook-up and disconnect
Price$12.99
ID 068-250-01
068-250-01 Model 10 and 20 Replacement Master Cylinder Cap

Master cylinder replacement cap for Titan/Dexter model 10 and model 20 actuators.

Price$14.99
ID 068-147-00
068-147-00 Model 60 Replacement Master Cylinder Cap

Master cylinder replacement cap for Titan/Dexter model 60 actuators.

Price$19.99
ID 25388
25388 Bolt Kit for Channel Mount Lunette Ring and Adjustable Couplers

This replacement channel-mount coupler hardware kit features grade-8 bolts for solid mounting. It includes two 5/8" x 4-3/4" hex bolts, two 5/8" Nylock hex nuts and four 5/8" flat washers.

Price$23.99
ID K71-072-00
K71-072-00 Manual Top Reverse Lockout Cap for UFP Actuators

This manual brake lockout cap is an option for the UFP/Dexter actuators. It allows trailers equipped with drum or disc brakes to be backed up over soft ground or up inclines without fully engaging the brakes. The cap is designed to disengage when the trailer is pulled forward after backing up. Therefore it must manually reset prior to each time the user backs up. It replaces the basic plastic top cap. 

Cap has a zinc plating for superior corrosion resistance and is simple to install.

Price$23.99
ID 87073
87073 2" Ball - 2" Channel Bolt-On Coupler
  • Ball size: 2 inch
  • Inside channel width: 2 inch
  • Maximum gross trailer weight: 3,500 pounds
  • Easy Bolt- on installation
  • Husky straight coupler includes a safety pin as an additional means of securing the ball clamp in a locked position (safety pin is required to be used at all times) and a safety chain to eliminate loss of the safety pin
  • The quick release assembly allows for fast and safe locking and unlocking of the ball clamp for convenient hook-up and disconnect
Price$24.99
ID 87074
87074 2" Ball - 2-1/2" Channel Bolt-On Coupler
  • Ball size: 2"
  • Inside channel width: 2-1/2"
  • Maximum gross trailer weight: 3,500 pounds
  • Easy Bolt-On installation
  • Husky straight coupler includes a safety pin as an additional means of securing the ball clamp in a locked position (safety pin is required to be used at all times) and a safety chain to eliminate loss of the safety pin
  • The quick release assembly allows for fast and safe locking and unlocking of the ball clamp for convenient hook-up and disconnect
Price$24.99
ID 87075
87075 2" Ball - 3" Channel Bolt-On Coupler
  • Ball size: 2 inch
  • Inside channel width: 3 inch
  • Maximum gross trailer weight: 3,500 pounds
  • Easy Bolt-On installation
  • Husky straight coupler includes a safety pin as an additional means of securing the ball clamp in a locked position (safety pin is required to be used at all times) and a safety chain to eliminate loss of the safety pin
  • The quick release assembly allows for fast and safe locking and unlocking of the ball clamp for convenient hook-up and disconnect
Price$24.99
ID 87076
87076 2" Ball - 3" Channel Bolt-On Coupler
  • Ball size: 2 inch
  • Inside channel width: 3 inch
  • Maximum gross trailer weight: 5,000 pounds
  • Easy Bolt-On installation
  • Husky straight coupler includes a safety pin as an additional means of securing the ball clamp in a locked position (safety pin is required to be used at all times) and a safety chain to eliminate loss of the safety pin
  • The quick release assembly allows for fast and safe locking and unlocking of the ball clamp for convenient hook-up and disconnect
Price$24.99
ID 071-196-00
071-196-00 Breakaway Safety Cable Assembly for UFP A-75 and A-84 Actuators

Zinc plated replacement break-away cable with s-hook and bracket for UFP/Dexter Model A-75 and A-84 hydraulic disc and drum brake actuators. 

Cable measures 15"

Price$26.99
ID RT2092
RT2092 5 Position 6 Hole Adjustable Channel Bracket

RT2092 5 Position 6 Hole Adjustable Channel Bracket

Price$29.99
ID CA-5100-B
CA-5100-B 2" Ball Weld-on Stamped A-Frame Coupler
1 of 2
  • 5,000 lb capacity 2" ball size 
  • Weld-on design to fit 50 degree angle trailer frames
  • Stamped coupler is 100% ball fitted to ensure a proper fit when coupler is attached to the hitch ball
  • Durable exterior grade black powder coat finish
  • Coupler lever-latch design is setup for easy and safe coupling and uncoupling
  • Padlock hole provided for trailer security locks or pin.
  • Include all SAE required markings and are compliant to J684 standard
Price$43.99
ID CA-5400-B
CA-5400-B 2-5/16" Ball Weld-on Stamped A-Frame Coupler
1 of 2
  • 14,000 lb capacity 2-5/16" ball size 
  • Weld-on design to fit 50 degree angle trailer frames
  • Stamped coupler is 100% ball fitted to ensure a proper fit when coupler is attached to the hitch ball
  • Durable exterior grade black powder coat finish
  • Coupler latch design is setup for easy and safe coupling and uncoupling
  • Padlock hole provided for trailer security locks or pin.
  • Include all SAE required markings and are compliant to J684 standard
Price$43.99
ID 25330
25330 2-5/16" Ball 14K Channel Mount Adjustable Coupler
1 of 5
This CURT adjustable channel coupler features a cast design with a simple latch. It comes with a durable gloss black powder coat finish for corrosion resistance and has a gross trailer weight capacity of 14,000 lbs. and a tongue weight capacity of 2,100 lbs. It is designed to fit a 2-5/16" diameter trailer ball.
  • Compatible with standard channels that use 2" bolt center spacings
  • Secured by a dual-bolt mounting system - bolts are included
  • Bolt hole spacing is 2" center hole to center hole
  • Channel-mount allows for easy height adjustment
  • Easy-lock latching system for simple operation
  • Features holes to accept a safety pin or coupler lock
  • Constructed from heavy-duty cast steel
  • Protected by a durable gloss black powder coat finish
Price$49.99
ID CTA-400
CTA-400 2-5/16" Ball 14K Channel Mount Stamped Adjustable Coupler
  • 14,000 lb capacity 2-5/16" ball size 
  • Bolt-on design - Includes mounting hardware to bolt to channel bracket and is setup for an industry standard 3" wide channel
  • Bolt spacing is 2" on center
  • Stamped coupler is 100% ball fitted to ensure a proper fit when coupler is attached to the hitch ball
  • Durable exterior grade black powder coat finish
  • Coupler latch design is setup for easy and safe coupling and uncoupling
  • Padlock hole provided for trailer security locks or pin.
  • Include all SAE required markings and are compliant to J684 standard
Price$49.99
ID CTA-400-Z
CTA-400-Z 2-5/16" Ball Zinc 14K Channel Mount Stamped Adjustable Coupler

CTA-400 2-5/16" Ball Zinc 14K Channel Mount Stamped Adjustable Coupler

  • 14,000 lb capacity 2-5/16" ball size 
  • Bolt-on design - Includes mounting hardware to bolt to channel bracket and is setup for an industry standard 3" wide channel
  • Bolt spacing is 2" on center
  • Stamped coupler is 100% ball fitted to ensure a proper fit when coupler is attached to the hitch ball
  • Durable weather resistant zinc coated finish
  • Coupler latch design is setup for easy and safe coupling and uncoupling
  • Padlock hole provided for trailer security locks or pin.
  • Include all SAE required markings and are compliant to J684 standard
Price$49.99
ID 068-213-00
068-213-00 Reverse Lock Out Solenoid
1 of 3

Reverse lock out solenoid for disc brake systems. This solenoid allows for free backing of trailers eliminating the need to manually lock out the brakes. This solenoid can be used with either hydraulic disc or drum brakes. 800PSI rated

Price$56.99
ID 48660
48660 3"ID Channel Mount Lunette Eye
1 of 4
This lunette eye is designed to mount on standard 3" width channels allowing for easy height adjustment and trailer levelling. It features a forged steel construction and boasts a gross trailer weight capacity of 24,000 lbs. With a 3" inside diameter this lunette ring fits a variety pintle hooks and ball and pintle combinations
  • 3" inside diameter fits pintle hooks, ball & pintle combinations or clevis bars
  • Compatible with all 3" width adjustable channels
  • Adjustable channel mount allows for precise trailer leveling
  • 2" center to center bolt pattern for simple and secure attachment
  • Constructed from forged steel for superior strength

Mounting Bolts not included

Price$74.99
« Previous12 »