The Lippert 2024013264 pre greased 10" hub and drum kit fits 3500lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 10" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - K-122460 Integrated hub-and-drum 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 10" x 2-1/4" hydraulic and electric trailer brakes
  • 1/2"-20 thread pitch lug studs
  • Rated 1750 lbs capacity per side
• 1 - L44649 bearing cone (pre-greased and pre-installed)
  • 1-1/16" (1.063") inner diameter
• 1 - L68149 bearing cone (pre-greased and pre-installed)
  • 1-3/8" (1.378") inner diameter
• 1 - L44610 outer bearing cup race (pre-installed)
• 1 - L68111 inner bearing cup race (pre-installed)
• 1 - 171255TB Grease seal (See Note)
  • 1.719" inner diameter
  • 2.565" outer diameter
• 1 - 1.98" outer diameter lube style cap
• 1 - Rubber lube style cap plug
• 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
• 1 - 1" round spindle washer (1.03" ID x 1.68" OD)
• 1 - 1" 6 slotted spindle nut
• 1 - 1-3/4" cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB

The Lippert 2024013262 pre greased 12" hub and drum kit fits 5000lb and 6000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - K-122463 Integrated hub-and-drum 6 on 5-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 12" x 2" hydraulic and electric trailer brakes
  • 1/2"-20 thread pitch lug studs
  • Rated 3000 lbs capacity per side
• 1 - 15123 bearing cone (pre-greased and pre-installed)
  • 1-1/4" (1.250") inner diameter
• 1 - 25580 bearing cone (pre-greased and pre-installed)
  • 1-3/4" (1.750") inner diameter
• 1 - 15245 outer bearing cup race (pre-installed)
• 1 - 25520 inner bearing cup race (pre-installed)
• 1 - 22333TB Grease seal (See Note)
  • 2.250" inner diameter
  • 3.376" outer diameter
• 1 - 2.44" outer diameter lube style cap
• 1 - Rubber lube style cap plug
• 6 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
• 1 - 1" round spindle washer (1.03" ID x 2.00" OD)
• 1 - 1" 6 slotted spindle nut
• 1 - 1-3/4"cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

Additional Note: 5000lb and 5200lb axles normally have an outer bearing number LM67048 which is the same 1.250" inner diameter that this drum kit 15123 bearing uses. the difference is the outer bore of the drum but all the parts in this kit will still work on the axle beam.

The Lippert 2024013260 pre greased 12" hub and drum kit fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - K-122465 Integrated hub-and-drum 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 12" x 2" hydraulic and electric trailer brakes
  • 1/2"-20 thread pitch lug studs
  • Rated 3500 lbs capacity per side
• 1 - 14125A bearing cone (pre-greased and pre-installed)
  • 1-1/4" (1.250") inner diameter
• 1 - 25580 bearing cone (pre-greased and pre-installed)
  • 1-3/4" (1.750") inner diameter
• 1 - 14276 outer bearing cup race (pre-installed)
• 1 - 25520 inner bearing cup race (pre-installed)
• 1 - 22333TB Grease seal (See Note)
  • 2.250" inner diameter
  • 3.376" outer diameter
• 1 - 2.72" outer diameter lube style cap
• 1 - Rubber lube style cap plug
• 8 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
• 1 - 1" round spindle washer (1.06" ID x 2.00" OD)
• 1 - 1" 6 slotted spindle nut
• 1 - 1-3/4' cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB

The Lippert 2024013261 pre greased 12" hub and drum kit fits 7000lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with a Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/4" inner diameter outer bearing and a 1-3/4" inner diameter inner bearing combination

Complete pre-greased fully assembled boxed trailer 12" drum kit for 1 wheel.

Pre-greased fully assembled kit Includes:

• 1 - K-141290 Integrated hub-and-drum 8 on 6-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • Works with 12" x 2" hydraulic and electric trailer brakes
  • 9/16"-18 thread pitch lug studs
  • Rated 3500 lbs capacity per side
• 1 - 14125A bearing cone (pre-greased and pre-installed)
  • 1-1/4" (1.250") inner diameter
• 1 - 25580 bearing cone (pre-greased and pre-installed)
  • 1-3/4" (1.750") inner diameter
• 1 - 14276 outer bearing cup race (pre-installed)
• 1 - 25520 inner bearing cup race (pre-installed)
• 1 - 22333TB Grease seal (See Note)
  • 2.250" inner diameter
  • 3.376" outer diameter
• 1 - 2.72" outer diameter lube style cap
• 1 - Rubber lube style cap plug
• 8 - 9/16"-18 thread pitch zinc plated 60 degree coned lug nuts
• 1 - 1" round spindle washer (1.06" ID x 2.00" OD)
• 1 - 1" 6 slotted spindle nut
• 1 - 1-3/4" cotter pin

This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Note: Some trailer applications use a 2.125" inner diameter grease seal. This kit will not work on those applications without purchasing an additional grease seal#21333TB