Filter Results
Sort Order
Axle Specifications
Light Function
Jack Type
Tire Specifications
Manufacturer
Home » Manufacturers » KTI Hydraulics
ID 25-3
25-3 KTI Dump Reservoir Breather Cap with Dipstick
1 of 2

KTI plastic dump motor reservoir breather filler cap with metal dipstick


  • Features built-in vent to release pressure build up in the tank.
  • Made with rubber O-ring for tight seal.
  • Used on KTI plastic and steel reservoir tanks.
Price$9.99
ID 74-03
74-03 KTI Hydraulic Pump Harness for Solenoid and Coils
1 of 4
KTI pigtail to round male. This KTI Pigtail consist of 4 wires already equipped with crimped ends to connect right to the pump's solenoid and magnetic coils.
  • Made of four 14 gauge wires in a molten rubber cord.
  • Comes with one round molded male water tight end
  • Features a simple "screw in and go" design for connecting your KTI extension cord and cord/remote to the hydraulic pump
  • Designed to fit on any 2015 and newer KTI power up/power down hydraulic pumps
Note: electrical components are non returnable
Price$24.99
ID LC-08-S-5B
LC-08-S-5B Square KTI Hydraulic Pump Magnetic Coil for Down Valve with Spade Connections
1 of 3
KTI Hydraulics Electric Magnet Coil 10 volt DC
  • Used to open the hydraulic down-valve on both KTI power up/down and gravity down hydraulic pumps.
  • Slides over the valve and has two electrical spade prongs.
Note: electrical components are non returnable
Price$39.99
ID LC2-08-C-5B
LC2-08-C-5B Round KTI Hydraulic Pump Magnetic Coil for Up Valve with Spade Connections
1 of 3
KTI Hydraulics electric magnet coil 10 volt DC
  • Used to open the hydraulic up-valve on both KTI power up/down and gravity-down pumps.
  • Slides over the valve and has two electrical spade prongs.
Note: electrical components are non returnable
Price$39.99
ID 395-55
395-55 KTI Hydraulic Pump 2 Button Pendant Dump Remote
1 of 3
KTI Replacement removable 2-button remote w/ 7" long quick connect
  • Made of four 14 gauge wires inside a molten rubber cord.
  • Comes with one round male water tight end.
  • Features a simple "screw-in and go" design.
  • Water resistant remote dimensions: 4-3/8" x 2-1/2" x 2-1/8"
  • Remote has 2 square magnets on back for sticking to steel.
  • Comes with a large "up" button and "down" button.
  • Remote has a quick removable connection for quick replacement of remote only
  • Fits on 2015 and newer KTI power up /power down pumps.
Note 1: Does not come with extension cable
Note 2: electrical components are non returnable
Price$45.99
ID 74-06
74-06 KTI Hydraulic Pump 15ft Pendant Dump Remote Extension Cable
1 of 2
KTI 15-foot Pendant extension cable. Great for adding more length on your KTI hydraulic pump controller. 
  • Made of four 14 gauge wires in a molten rubber cord.
  • Comes with 1 Round Male and Female water tight ends.
  • Features a simple "screw-in and go" design.
  • Designed to fit on any 2015 and newer KTI power up/power down hydraulic pump controls
Note: electrical components are non returnable
Price$54.99
ID 391-2
391-2 KTI 4 Post Hydraulic Pump Solenoid
1 of 4
KTI Hydraulics Solenoid
  • 12 volt DC 100 AMP
  • Standard replacement solenoid for KTI power up/power down hydraulic pumps.
  • Used on a vide range of dumps, tilts, and hydraulic dovetail trailers.
  • Construction is molten plastic with zinc coated steel bracket.
Note: electrical components are non returnable
Price$59.99