Nut for C-Type equalizer typically used on boat trailers with hook end suspension springs. Nut is 5/8"-11

This  Keyed spindle washer fits 13/16" threaded trailer spindles with a keyway notch. 1-5/8" Outside diameter, 13/16" Inside diameter. 3/32" Thick. Commonly used on older EZ Loader Axles.

Bolt for C-Type equalizer typically used on boat trailers with hook end suspension springs. Bolt is 5/8"-11 x 4-1/2" long

Used in multi-axle suspensions which accommodates C-Hook style leaf springs. (Takes 5/8" bolt #290-001669 Sold Separately)

This Oil Bath Cap will fit all UFP/Dexter and  EZ Loader Threaded 5-Lug Hubs, Brake drums, and Rotors whether axle has a straight or a tapered spindle. This Cap includes O-Ring. Recommended Socket 2-3/8" 6-Point / 25-30ft. lbs.

Dimensions: 2.125" OD @ Threads  (2.125"-16Thread)

Model Year: 2005-Current.

Notes: This Cap replaces the early style "Plastic" Reliable Oil Bath Cap. When installing, use a small amount of "Red RTV" Sealant on the threaded portion of cap. Ensure O-Ring is seated correctly.

24" Flexible hose for hydraulic trailer brakes. Tubing is D.O.T. approved.

This Oil Bath Cap will fit all UFP/Dexter and  EZ Loader Threaded 6-Lug Hubs, Brake drums, and Rotors whether axle has a straight or a tapered spindle. This Cap includes O-Ring. Recommended Socket 2-7/8" 6-Point / 25-30ft. lbs.

Dimensions: 2.50" OD @ Threads  (2.50"-16Thread)

Model Year: 2005-Current.

Notes: This Cap will replace the early style Reliable "Plastic" Oil Bath Caps. When installing, use a small amount of "Red RTV" Sealant on the threaded portion of cap. Ensure O-Ring is seated correctly.

This 2" x 20' Yellow winch strap is commonly used on most boat trailers using Fulton brand hand winches rated 2600 to 3200 lbs capacity with a 2" wide drum spool.

• Working load limit is 4,000 lbs
• Max breaking strength is 10,000 lbs
• Designed for use with Fulton brand hand winches
• Made of strong nylon webbing and includes hook.

Not recommended for 3700lb capacity hand winches with 3" width drums.

This Complete 300-029534 H1000 OIL BATH idler hub kit fits EZ Loader boat trailers 2005 to present that use a tapered spindle with 2990lb to 3700lb capacity rated axles and has a 5 on 4-1/2" bolt pattern. Compatible all with 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination style E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands using standard 3500lbs tapered spindles.

Kit includes:

• 1 - 290-029195 H1000 Oil bath idler hub with 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
  • 6-1/2" diameter flange
  • 4-1/8" overall height
  • 1/2"-20 thread pitch lug studs
  • Rated 1850 lbs. capacity per side
• 1 - L44649 bearing
  • 1-1/16" (1.063") inner diameter
• 1 - L68149 bearing
  • 1-3/8" (1.378") inner diameter
• 1 - L44610 outer bearing race (pre-installed)
• 1 - L68111 inner bearing race (pre-installed)
• 1 - 250-031468 Rubber coated oil seal
  • 1.687" inner diameter
  • 2.565" outer diameter
• 1 - 250-034388 Aluminum oil bath cap with O-Ring
• 1 - 034-325-00 Pipe plug
• 1 - 005-164-00 D-style washer
• 1 - 006-210-00 Spindle nut
• 1 - 006-211-00 Spindle nut cotter pin retainer (Cookie Cutter)
• 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
• 1 - Cotter pin

This trailer oil bath idler hub is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.

Please note: EZ Loader suggest using 80-90w Gear Lube in their oil bath hubs.