Filter Results
Sort Order
Axle Specifications
Light Function
Jack Type
Tire Specifications
Manufacturer
Home » Manufacturers » ALCOM LLC
ID 68-0198
68-0198 White 2" x 3" HDPE Striker Strip
1 of 2

Striker plate white 2" x 3" x 1/8" thick for Aluminum Alcom Barlock

Price$5.99
ID 54-0198
54-0198 Pull-Down Catch with Padlock Eye
1 of 4


Padlock eye pull-down catch comes complete with a striker and pre-drilled bolt holes for fast and easy installation. It is constructed from sturdy zinc-plated steel for lasting wear and corrosion resistance.

Price$8.99
ID 58-0102
58-0102 4-1/2" Round 12 LED Interior Light With Switch
1 of 4
4-1/2" Round 12 LED Interior Light  With Switch. Our LED accent and area lighting products incorporate the industry's top-performing LEDs and materials, and the highest efficiency optical designs. At 4.5", the E50 LED dome light features 12 high efficiency LEDs, putting out 300 lumens.

  • Lamp features twelve high efficiency LEDs
  • Sleek and stylish surface mount design
  • Integrated ON/OFF switch
  • Two mounting hole patterns, hidden behind lens
  • Reliable performance over 50,000 hours
  • WIRE COLORS
    White –
    Ground, Black – Positive
Price$9.99
ID 52-0034
52-0034 2-1/2"-OD x 2" Tall Tapered Black Round Rubber Ramp Door Bumper
Rubber tapered bumper helps protect from damage caused by door handles, latches, and cam locks by using this bumper on nearby surfaces.
Acts as a cushion between ground and loading ramp or lift gate. Bumper is an unobtrusive 2" tall x 2-1/2" diameter at bas and 1-5/8" diameter at top of taper. Used as an easy way to help protect surfaces from accidental damage from nearby door handles, latches, or cam locks. It can also be used as a cushion for loading ramps or lift gates to prevent damage when closing or opening.
Price$14.99
ID 52-0463
52-0463 Aluminum Door Hasp 4" Centers

Replacement door hasp. Holes on both hasp components align to accommodate a wide variety of trailer locks to secure the handle. Hasp mounting holes are 4" on center. Overall length of hasp is 5-1/8". Hasp is 2" wide and made of aluminum to resist corrosion. 

Mounting hardware not included.
Price$14.99
ID 52-0257
52-0257 8" Bolt-on Aluminum Strap Hinge
1 of 4

Bolt-on 8" aluminum strap hinge for enclosed Alcom brand trailer rear ramp doors. 8" dimension is from center of hinge to end of flat leg.


  • 9-3/4" overall length - open
  • 3 base bolt holes - 1-1/2" bolt center spacings on base with 4-1/2" width
  • 3 leg bolt holes - 2-3/8" bolt center spacings on leg with 2" width

Fits the following ALCOM LLC enclosed trailer brands - Mission, E-Z Hauler, CargoPro, SnoPro, and Stealth trailers.

Price$29.99
ID 52-0044
52-0044 48" Aluminum Heavy Duty Trailer Door Bar Lock
1 of 3
48" Heavy duty aluminum bar lock helps resist corrosion. Main bar is 48-1/4"" tip to tip with handle mounted center of bar. Perfect for side entry, single rear and rear ramp door aluminum frame trailer applications. Can be mounted as a left or right. 

Please see images for dimensions

Hasp and mounting hardware not included.
Price$121.99
ID ALDW017
ALDW017 Aluminum Pull-Out Step
1 of 9

25-1/2" Wide x 11-1/2" Deep x 2" Tall Aluminum pull-out step. Step can be added under side entry trailer doors. The mounting area of this step is 24" on center. Typical installations include welding to aluminum frames but we have also had customers bolt steel brackets to it to add to their steel frame trailers.


  • Overall dimensions - 26-1/4" wide x 27-1/2" deep x 4" tall
  • Step dimension - 25-1/2" wide x 11-1/2" deep x 2" tall
  • Mount Area dimension - 2" wide x 14-3/4" deep x 1" tall.
Price$351.99
ID ALRR30-4
ALRR30-4 4' Low Car Ramp Extension Kit for Enclosed Car Hauler Trailers
1 of 19

4’ Low Car Kit for enclosed car trailers. Designed to replace the stock starter flap ramp extension that normally comes on car trailers. Includes all mounting hardware needed to install on a car trailer ramp door to allow for a smoother longer angle of approach when loading race cars, automobiles, and other low to the ground applications. Ramps are ribbed on top for added grip during wet and muddy conditions. Hand knobs hold ramps securely to trailer ramp door while driving to keep them from banging around. Can be installed on any enclosed car trailer with wood ramp doors.

Please note that each ramp will mount thru the welded-on aluminum hinge, thru door, and thru riser bumpers. (use 2 riser bumpers per ramp)

Each ramp measures

  • 51-3/4” Tall with hinge open
  • 50-1/2” Tall with hinge folded
  • 48-1/4” Extended ramp portion hanging off ramp door
  • 24” Wide
  • 2-1/2” Thick at ramp door side and tapers down to 1” Thick at ground level


Kit Includes

  • Quantity 2 - 4-foot heavy duty aluminum ramp extensions with built in hinge
  • 2 Hand knobs and threaded wood inserts for securing to trailer ramp (in stowed position)
  • Mounting hardware to bolt thru ramp door
  • Quantity 4 – 4” tall ramp door riser bumpers for an added smoother angle of approach
Price$854.99