The Dexter K08-247-1G pre greased 10" hub and drum kit fits 3500lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Dexter Axle™ Multipurpose #2 lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-3/8" inner diameter inner bearing combination
Complete pre-greased fully assembled boxed trailer 10" drum kit for 1 wheel.
Pre-greased fully assembled kit Includes:
- 1 - 008-247-05 Integrated hub-and-drum 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 10" x 2-1/4" hydraulic and electric trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 1750 lbs capacity per side
- 1 - 031-031-02 L44649 bearing cone (pre-greased and pre-installed)
- 1-1/16" (1.063") inner diameter
- 1 - 031-033-02 L68149 bearing cone (pre-greased and pre-installed)
- 1-3/8" (1.378") inner diameter
- 1 - 031-031-01 L44610 outer bearing cup race (pre-installed)
- 1 - 031-033-01 L68111 inner bearing cup race (pre-installed)
- 1 - 010-019-00 171255TB Grease seal (See Note)
- 1.719" inner diameter
- 2.565" outer diameter
- 1 - 021-041-01 1.98" outer diameter lube style cap and rubber plug
- 1 - 085-001-00 rubber lube style cap plug
- 1 - 021-003-00 1.98" outer diameter standard dust cap
- 5 - 006-080-00 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
- 1 - 005-023-00 1" d shaped spindle washer
- 1 - 005-027-00 1" round spindle washer
- 1 - 006-176-00 1" slotted spindle nut
- 1 - 019-002-00 cotter pin
- 1 - 006-191-00 1" hex spindle nut
- 1 - 006-190-00 d shaped hex nut retainer
- 1 - 059-831-00 instruction sheet
This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.
Note: Some trailer applications use a 1.687" inner diameter grease seal. This kit will not work on those applications without purchasing an replacement grease seal#168255TB
