The 19-140 pre greased 7" hub and drum kit fits 2200lb capacity axles. Compatible with electric and hydraulic drum brake systems. No need to assemble, this hub drum already has the bearings greased with Exxon Mobile RONEX™ MP lithium complex water resistant wheel bearing grease. The grease seal is already installed. No need to pack the bearings. Comes with both lubeable style dust cap and standard solid dust cap that are both compatible all with E-Z Lube, Sure-Lube, Accu-Lube, Super Lube, Easy Grease and non lubing spindles. Interchangeable with all major trailer axle brands that use a 1-1/16" inner diameter outer bearing and a 1-1/16" inner diameter inner bearing combination
Complete pre-greased fully assembled boxed trailer 7" drum kit for 1 wheel.
Pre-greased fully assembled kit Includes:
- 1 - Integrated hub-and-drum 5 on 4-1/2" lug bolt pattern (see image on how to measure lug spacing)
- Works with 7" x 1-1/4" electric and 7" x 1-3/4" hydraulic trailer brakes
- 1/2"-20 thread pitch lug studs
- Rated 1100 lbs capacity per side
- 2- L44649 bearings
- 1-1/16" (1.063") inner diameter
- 2 - L44610 outer bearing races (pre-installed)
- 1 - 12192TB Grease seal
- 1.249" inner diameter
- 1.983" outer diameter
- 1 - 1.98" outer diameter lube style cap and rubber plug
- 1 - 1.98" outer diameter standard dust cap
- 5 - 1/2"-20 thread pitch zinc plated 60 degree coned lug nuts
This kit is interchangeable with all industry standard axle brands including Dexter Axle, Lippert Components (LCI), Rockwell American, AL-KO, Axle Tek, TK Trailer Axles, UFP by Dexter Marine, Tie Down by Dexter Marine, and C.E. Smith.
